XTEMOS ELEMENT
AJAX PRODUCTS TABS
PosiTector Inspection Kit
TQC Dust Tape Kit
Cross Cut Knife
PosiTest AT-Manual Kit
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
KTA Steel Composite Panel
Bacharach Replacement Wicks (4 Pack)
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
SSPC Surface Preparation Specifications and Practices
Atkins 49126-K
Psychro-Dyne Psychrometer
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
QP-3 Worker Safety and Health Program
This Corporate Worker Safety and Health Program conforms to the criteria of SSPC: The Society for Protective Coatings Qualification Procedure No. 3 (QP 3) Standard Procedure for Evaluating Qualifications of Shop Painting Applicators. The program is designed to be used in conjunction with a current copy of 29 CFR 1910 (not included).
PosiTector SHD Shore Hardness Durometer Probe
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
HILTI PS 38 Mutidetector
PosiTest AT 50 mm C1583 Conversion Kit
Delmhorst Moisture Meters
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
KTA Test Panels – Call To Order
KTA-Tator, Inc. fabricates a variety of test panel sizes. Commercial grade hot-rolled carbon steel panels are available with mill scale or abrasive blast cleaned. Please "Contact Us" to inquire about our line of steel test panels. Our staff will be happy to explain all of the sizes and finishing options that are available, and to provide you with pricing, including shipping options and charges. Fabricated in the USA. Call To Order
BYK Moisture Meters
PosiTector Inspection Kit
KTA Cross Cut Guide Adhesion Test Kit
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Tri-Weld Welding Gauge
The Tri-Weld Gauge provides easy to read measurements of the following welding and fit-up parameters; Internal Hi-Lo, Gap, Filet Height and Leg Length, Weld Height, Undercut Depth, Misalignment, and Angle of Preparation. The Tri-Weld Gauge is equipped with 3 separate scales for all measurements. Metric and Imperial (Thousands of an ainch and fractions of an inch). Rules for liner measurements are located on the top and bottom of the Front side of the Scale Plate. The Tri-Weld Gauge is also equipped with 7 unique diameter comparators which are half circles in 1/16" to 1/2" in 1/16" increments (1.6mm to 12.7mm in 1.6mm increments) for convenient diameter estimates (Filet Welds, Welding Rod/Wire, etc.)
