moisture detection electrical impedence meter

Tools & Techniques for Measuring Coating Quality – Part 2: Moisture Detection

This is Part 2 of a 2-part series describing the instrumentation used to inspect the quality of cleaning and painting.  Part 1 described the instruments used for determining the quality of cleaning and paint.  Part 2 addresses moisture detection.  The moisture content of the concrete should be determined prior to painting. In the author’s experience, moisture within the substrate is a leading cause of coating failures on concrete.  If the moisture is elevated, the source(s) should be identified and...

measuring coating quality

Tools & Techniques for Measuring Coating Quality – Part 1 – Cleaning and Painting

When you spend money on a product or service, you expect quality, regardless of the cost.  If you purchase the most inexpensive Chevrolet that is made, you still expect quality.  While the braking system in the Chevrolet may be less sophisticated than a Mercedes, the brakes better work and exhibit quality commensurate with its design.  You expect the parts and installation to meet all of the standards imposed by the manufacturer for that class of vehicle. Expectations of quality for...

Localized Assessment of Air Leakage in Building Air Barriers

ANSI/ASHRAE/IES Energy Standard 90.1-2010 and the 2012 International Energy Conservation Code require that building envelopes be designed to limit uncontrolled air leakage into and out of buildings. Air leakage in buildings is controlled at the time of construction by installing air barrier systems.  ASTM E1186-17, “Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems” defines an air barrier system as “a system in building construction that is designed and installed to reduce air leakage...