Cath-Tech Hexcorder MM CIPS/DCVG Surveys
$10,500.00
In stock
- Description
- Additional information
- Reviews (0)
Description
Cath-Tech Hexcorder MM CIPS/DCVG Surveys W/ Hip Pack Wire Dispenser
The Cath-Tech™ Hexcorder Millennium GPS is the ultimate survey tool, capable of performing close interval surveys (CIPS) as well as direct current voltage gradient (DCVG) surveys.
- CIPS for Potential Surveys
- DCVG for Coating Condition Surveys
Features
•Work with interruption cycles as fast as 1 second
•User alarms can be enabled to help ensure data integrity
•GPS location data stored with each reading
•Records chainage, date and time with each reading
•Active AC filter to remove the effect of induced AC
•Reads and stores waveforms
•Comments can be easily entered into the data stream
•Data stored in an ASCII comma delimited text file
No special software required
Easy to import and graph in any standard spreadsheet or database program
• Software upgradeable
•Choice of hip pack or back pack wire dispenser
•Comes complete with all cables, reference electrodes, etc to start surveying, including a spool of wire
•Optional sub-meter GPS precision available
•Optional on-site survey training is available
•Comprehensive 1 year warranty
Benefits
•Can perform three different types of survey at the same time, CIPS, DCVG and mapping
•All data obtained in the same location with the same weather and soil conditions
•Easy to correlate cathodic protection data with coating integrity data to better prioritize remediation
•Waveforms allow the user to capture electrical interference
•Can also act as a stationary data logger for stray or telluric current studies
•GPS location data can be imported into mapping software
Additional information
| Weight | 25.0000 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
You may also like…
Add to cartQuick ViewCath-Tech Smart Logger II Dual Input w/ GPS
$3,600.00Add to cartQuick View
View productsQuick ViewRigger Pro Series CP
$17.95Hi-Viz reinforced cotton canvas palm
Heavy Duty full finger, thumb and dorsal TPR protection
Internal perforated padding (3mm) provides secondary dorsal impact protection
ASTM and EN388 certified for abrasion, cut, tear, puncture
Fully WashableCUT LEVEL 5
View productsQuick View- Add to cartQuick View
Cath-Tech CI-50 Current Interrupter w/ GPS
$2,195.00* Portable current interrupter
* GPS continuously synchronized
· Microprocessor driven
· Flash memory
· 5 programmable time schedules
⇒ Interruption cycle
⇒ Start and stop times
⇒ Start and stop dates
· Holds power ON when not interrupting
· Colour coded SuperCon® output
terminals
· Storage compartment for cables and
accessories
· Comprehensive 1 year warranty
Technical Specification
· Capacity DC: Up to 50A at 100VDC
· Switching: Electronic relay
· Case: IP67 / NEMA 4X plastic case with o-ring seal and locking hasp
· Dimensions: 27cm x 25cm x 20cm (11” x 10” x 8”)
· Weight: 5 kg (11 lb)
· Battery: 7.2V 2 amp hour NiMH
· User Interface: 20×4 LCD display, sunlight readable, and 16 key pad
· Com Port: RS-232 communication port, 9 pin male
· External Power: Accepts 12V DC external power to supplement battery life
· GPS synchronized, with magnet mount antenna for easy placement with view of the sky
⇒ Cycle time 1/4 sec to 6 min
⇒ Off time: 0 to 9999mSec (synchronized to the beginning of the minute, 0 seconds)
· Non GPS synchronized operation also possible
Included
· CI-50 Current Interrupter
· AC charger; 120/240V AC, 50/60 Hz input
· DC interruption cables with copper alligator clips and rubber boots
· Magnet mount GPS antenna
Add to cartQuick View - Add to cartQuick View
Cath-Tech CTL-3000 Analogue DCVG
$3,200.00Features
•Accurately locate coating defects
•Estimate defect size
•Indentify priority for excavation
•Monitor coating condition
•Confirm electrical continuity
•Single surveyor required
•Auto-zero function to remove bias from readings
•Comprehensive 1 year warranty
Technical Specification
•Meter: Centre zero analogue
•Input Impedance: 10, 100, 1000 Mohm
•Measurement: Scales to 10, 20, 50, 100, 200, 500, 1000, 2000, 5000 mV
•Case: Die cast aluminum, grey baked enamel
•Dimensions: 19cm x 10cm x 13cm (7.5” x 4” x 5”)
•Weight: 1.4 kg (3 lb)
•Battery: 12V 2.0 amp hour NiMH
•Half cell poles: Fiberglass, adjustable length
•Half cells: Cu/CuSO4
•Carrying Case: Plastic, IP67 rated 40.5cm x 33cm x 18cm (16” x 7” x 13”)
Included
•CTL-3000
•2 half cell poles with cables
•2 Cu/CuSO4 half cells
•AC charger; 120/240 V AC, 50/60 Hz input
•Carrying case
•Neck strap
•Owners manual
Add to cartQuick View - Add to cartQuick View
Cath-Tech CI-100 Current Interrupter w/ GPS
$2,520.00Features
•Portable current interrupter
•GPS continuously synchronized
•Microprocessor driven
•Flash memory
•5 programmable time schedules
Interruption cycle
Start and stop times
Start and stop dates
•Holds power ON when not interrupting
•Colour coded SupreCon® output terminals
•Storage compartment for cables and accessories
•Comprehensive 1 year warranty
Technical Specification
• Capacity DC: Up to 100A, up to 250VDC
• Capacity AC: Up to 100A, up to 600VAC
• Switching: Mechanical relay
• Case: IP67 / NEMA 4X plastic case with o-ring seal and locking hasp
• Dimensions: 40.5cm x 33cm x 18cm (16” x 13” x 7”)
• Weight: 9.5 kg (21 lb)
• Battery: 12V 5.5 amp hour sealed lead acid
• User Interface: 20×4 LCD display, sunlight readable, and 16 key pad
• Com Port: RS-232 communication port, 9 pin male
• External Power: Accepts 12V DC external power to supplement battery life
• GPS synchronized, with magnet mount antenna for easy placement with view of the sky
Cycle time 1/4 sec to 6 min
Off time: 0 to 9999mSec (synchronized to the beginning of the minute, 0 seconds)
• Non GPS synchronized operation also possible
Included
• CI-100 Current Interrupter
• AC charger; 120/240V AC, 50/60 Hz input
• DC interruption cables with copper alligator clips and rubber boots
• Magnet mount GPS antenna
• Owners manual
Specifications subject to change without notice, see owners manual for further information
Add to cartQuick View - Add to cartQuick View
Cath-Tech CorrReader Test Point Recorder
$1,395.00Record critical CP data such as pipe-soil potentials, AC, date, time and GPS location for many points such as; Test stations, Meters, Risers, Valves, Bonds, Tanks, etc.
Technical Specification
· Single channel, DC and AC:
⇒ DC range of +/-10V at 0.1 mV precision with ≤1% accuracy
⇒ AC range of 100V at 1 mV precision with ≤1% accuracy
· Input impedance ≥ 10 MΩ
· AC rejection at 50 Hz to 60 Hz ≥ 80db, 50 V RMS superimposed
· Heavy duty impact resistant IP65 NEMA 4 case
· Operator programmable interruption cycle and ON/OFF durations.
· 16×4 LCD sunlight readable high contrast display
· Membrane switch tactile keypad with 6 buttons
· Long life 3.6V Li Ion battery recharged via USB
· Fully integrated internal GPS
· Micro SD card memory & data storage
· Waterproof USB 2.0 interface for data transfer
· Dimensions: 12.5cm x 5cm x 19cm, 5” x 2” x 7.5”
· Weight: 525 g, 1.2 lbs
Features
· Designed for simple easy use, even by non-corrosion technicians
· Internal GPS for synchronization and location information
· Optional entry of operator comments, location ID, etc
· Data saved to SD card with GPS coordinates and date/time stamped, no more hand written notes
· Programmable GPS time offset to operate in local time
· Data stored in an ASCII comma delimited file, no special software required!
· Ergonomic hand held design with no-slip grips
· Waterproof 5 way binding posts for test leads
· Comprehensive 2 year warranty
Add to cartQuick View
Reviews
There are no reviews yet.