Showing all 362 results

PosiTest® HHD High Voltage Holiday Detector

$3,845.00
The hand-held portable PosiTest HHD is a pulse DC high voltage holiday detector featuring a voltage setting range of 500 to 35,000 volts.

PosiTest® LPD Holiday Detector

$15.00$1,220.00
Defelsko Positest LPD Holiday Detector Holiday detection has never been easier with the Defelsko Positest LPD.

Tinker & Rasor PRM

$1,100.00
Verify the output voltage of high voltage holiday detectors using the Tinker & Rasor Peak Reading Voltmeter.

Tinker-Rasor Low Voltage Wet Sponge Holiday-Pinhole Detector

$5.00$465.00
Verify a pinhole-free coating (up to 20 mils) using the low voltage wet sponge holiday detector from Tinkor-Rasor.

PosiTector DPM

$445.00$1,220.00
Positector DPM Standard Built-in Probe measures and records ambient conditions including air & surface temp., relative humidity & dew point temperature

PosiTector DPM L

$485.00
This dew point meter attaches to steel structures to measure and record environmental parameters independently for up to 200 days.

PosiTector DPMA

$580.00$1,355.00
The Positector 6000 DPMA probe is the perfect solution for gathering ambient conditions in the field.  Along with all of

PosiTector DPMIR

$500.00$1,275.00
Positector DPMIR The Positector DPMIR probe has everything you need to get your ambient conditions.  Just snap this probe onto

PosiTector DPMS

$550.00$1,325.00
Available in either standard or advanced models with built in or separate probe, this electronic psychrometer measures and records ambient conditions including air and surface temperatures, relative humidity, dew point temperature and the spread between the dew point and surface temperatures.

PosiTector IRT

$195.00$970.00
Positector IRT The Positector IRT probe offers an affordable way to add the infrared capability to a Positector 6000 body. 

PosiTector RTR Replica Tape Reader

$425.00$1,200.00
This remarkable digital spring micrometer measures and records average peak to valley surface profile height with improved accuracy us Testex Press-O-Film Replica Tape. It also provides inspectors with a digital record of measurements that can be downloaded to your computer.

PosiTector SHD Shore Hardness Durometer

$555.00$1,330.00
The PosiTector SHD Shore Hardnesss Durometer is a handheld electronic instrument that measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges - Shore A and Shore D.

PosiTector SPG Surface Profile Gauge

$410.00$1,535.00
The PosiTector SPG Surface Profile Gauge measures and records peak to valley surface profile heights.

Testex Analog Spring Micrometer

$220.00$374.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.'

Tinker & Rasor APW

$4,200.00
Detect pinholes in coating and linings greater than 20 mils thick. Variable voltage up to 35,000 volts. Select from various electrodes. Comes with a wand, ground wire, and battery charger.

DeFelsko PosiTector 6000 and Probes

$124.95$1,510.00
Positector 6000 and Probes. Choose either the Standard Memory Body or the Advanced Memory Body and then add your probes!

Paint Temperature Thermometer

$39.00
This easy-to-read dial thermometer is equipped with an 8" stainless steel stem and is designed to measure the temperature of coatings.

PosiTector 200 Ultrasonic Coating Thickness Gauge

$1,795.00$2,970.00
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more. B-Probe for coatings over wood, composites. 0-40 mils. C-Probe for coatings over concrete, fiberglass. 2-150 mils. D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.

PosiTector BHI

$920.00$1,695.00
Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials like harder plastics and fiber-reinforced plastic

PosiTector CMM IS

$145.00$1,970.00
Positector CMM IS conformance with ASTM F2170 and is designed to easily collect and report relative humidity in concrete floor slabs.  RH readings available on an Apple or Android smart device or a Positector Advanced gauge with a DPM probe.

PosiTector SPGTS

$650.00$1,425.00
Positector  SPGTS The SPGTS is designed to make measuring the surface profile of concrete a quick and easy task.  It

PosiTector SPGTS Probe

$650.00
Positector  SPGTS The SPGTS is designed to make measuring the surface profile of concrete a quick and easy task.  It

PosiTector Ultrasonic Wall Thickness Gauge

$805.00$2,365.00
Measure the wall thickness of pipe and other steel structures from one side using the DeFelsko UTG ultrasonic wall thickness gauge.

PosiTest AIR Leak Tester

$115.00$2,895.00
PosiTest AIR Leak Tester Quickly and easily detect air and water leaks in building envelopes and rigid air barrier systems

PosiTest AT Group Item

$35.00$2,935.00
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT (adhesion tester) uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.

PosiTest Coating Thickness Gauge

$350.00
This compact, lightweight, precisely balanced coating thickness gauge nondestructively measures the thickness of nonmagnetic coatings applied to ferrous substrates.

PosiTest® DFT

$495.00$695.00
The PosiTest DFT nondestructively measures the total thickness of coatings applied to ferrous (F model) or ferrous/Non-ferrous (F/NF model) metal substrates.

PTC Surface Temperature Thermometer

$75.00$87.00
KTA's PTC surface temperature thermometer is small (2" diameter) and lightweight (2 ounces) and measures the temperature of the surface via bimetallic base.

SST Probe and Accessories

$40.00$840.00
Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or

Testex Linearizing Spring Micrometer

$220.00$374.00
The Linearizing Spring Micrometer is designed to make reading Testex Press-O-Film Replica tape a simpler and more streamlined process.

Testex Press-O-Film Replica Tape

$38.00$50.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces. Coarse 0.8 to 2.5 / 20 to 64 X-Coarse 1.5 to 4.5 / 38 to 115 X-Coarse Plus 4.6 to 5.0 / 116 to 127

Tinker & Rasor AC-15 AC Warning System

$595.00
Tinker & Rasor AC-15 AC Warning System The Tinker & Rasor AC-15 AC warning system is made to measure the

Tinker & Rasor Copper-Copper/Sulfate (CSE) Half Cell Reference Electrodes

$55.00$80.00
Tinker & Rasor Copper-Copper/Sulfate (CSE) Half Cell Reference Electrodes Depending on the application you had in mind there are a

Tinker & Rasor Silver-Silver/Chloride (AgAg/Cl) Reference Electrode Kit

$285.00
Tinker & Rasor Silver-Silver/Chloride (AgAg/Cl) Reference Electrode Kit The Tinker & Rasor SC-4 reference electrode kit contains everything necessary to

Tinker & Rasor SR-2 Soil Resistivity Meter

$1,200.00
Tinker & Rasor SR-2 Soil Resistivity Meter The Tinker & Rasor SR-2 Soil Resistivity meter is the perfect tool for

Tinker & Rasor RF-IT Above Ground Insulator Tester

$600.00
Tinker & Rasor RF-IT Above Ground Insulator Tester The Tinker & Rasor RF-IT allows you to verify that there are

Tinker-Rasor CP Test Stations

$12.95$29.95
Tinker-Rasor CP Test Stations Tinker-Rasor CP test stations come in several designs depending on what your specific needs are.  These

Tinker-Rasor Soil Boxes

$130.00
Tinker-Rasor Soil Boxes The Tinker-Rasor soil boxes are perfect for easily testing the resistivity of soil whether you are in

12 Piece Fillet Weld Set

$93.75
Use for:
  • Checking Fillet Leg Size
  • Checking Fillet Throat Size
1/32" increments to 1/2", 1/16" increments to 1"

12′ Clamp Air Probe for PosiTest OTL

$140.00
Spring Clamp – Air Probe - 12' (3.6 m) -100 to 500°C (-148 to 930°F)

12′ Clamp Surface Probe for PosiTest OTL

$140.00
Spring Clamp – Surface Probe - 12' (3.6 m) -100 to 500°C (-148 to 930°F)

12′ Magnetic Air Probe for PosiTest OTL

$140.00
Magnetic – Air Probe - 12' (3.6 m) -100 to 300°C (-148 to 570°F)

12′ Magnetic Surface Probe for PosiTest OTL

$160.00
Magnetic – Surface Probe - 12' (3.6 m) -100 to 300°C (-148 to 570°F)

12′ Washer Surface Probe for PosiTest OTL

$140.00
Washer – Surface Probe - 12' (3.6 m) -100 to 500°C (-148 to 930°F)

20′ Clamp Air Probe for PosiTest OTL

$160.00
Spring Clamp – Air Probe - 20' (6 m) -100 to 500°C (-148 to 930°F)

20′ Clamp Surface Probe for PosiTest OTL

$160.00
Spring Clamp – Surface Probe - 20' (6 m) -100 to 500°C (-148 to 930°F)

20′ Magnetic Air Probe for PosiTest OTL

$160.00
Magnetic – Air Probe - 20' (6 m) -100 to 300°C (-148 to 570°F)

20′ Magnetic Surface Probe for PosiTest OTL

$180.00
Magnetic – Surface Probe - 20' (6 m) -100 to 300°C (-148 to 570°F)

20′ Washer Surface Probe for PosiTest OTL

$160.00
Washer – Surface Probe - 20' (6 m) -100 to 500°C (-148 to 930°F)

6′ Clamp Air Probe for PosiTest OTL

$130.00
Spring Clamp – Air Probe - 6' (1.8 m) -100 to 500°C (-148 to 930°F)

6′ Clamp Surface Probe for PosiTest OTL

$130.00
Spring Clamp – Surface Probe - 6' (1.8 m) -100 to 500°C (-148 to 930°F)

6′ Magnetic Air Probe for PosiTest OTL

$130.00
Magnetic – Air Probe - 6' (1.8 m) -100 to 300°C (-148 to 570°F)

6′ Magnetic Surface Probe for PosiTest OTL

$150.00
Magnetic – Surface Probe - 1.8 m (6') -100 to 300°C (-148 to 570°F)

6′ Washer Surface Probe for PosiTest OTL

$130.00
Washer – Surface Probe - 6' (1.8 m) -100 to 500°C (-148 to 930°F)

Adjustable Fillet Weld Gauge

$100.50
Measures:
  • Fillet weld leg lengths from 1/8" to 1" in 1/32" increments
  • Unequal legged fillet welds
  • Desired throat thickness of fillet welds

Amine Blush Test Kit

$225.00
The TQC Amine Blush Kit is a multi-step amine blush indicator. Due to advanced research on suitable media, the TQC Amine Blush Kit is the most advanced kit on the market.

Atkins 35200-K

$490.40
The Atkins hand-held thermocouple digital thermometer measures temperature from -100 to 999°F (-73 to 537°C) and stabilizes within 3 seconds of probe placement.

Atkins 35200-K and Probes

$68.00$490.40
The Atkins hand-held thermocouple digital thermometer measures temperature from -100 to 999°F (-73 to 537°C) and stabilizes within 3 seconds of probe placement.

Atkins 49126-K

$185.00
The Atkins hand-held thermocouple digital thermometer measures temperature from -100 to 999°F (-73 to 537°C) and stabilizes within 3 seconds of probe placement.

Atkins 50318-K

$99.95
A K-Type thermometer with a ceramic tip allowing for use in high temperature applications.  Measurement range is from -40° to 1,202° F.

Atkins 50335-K

$68.00
The Atkins hand-held thermocouple digital thermometer measures temperature from -100 to 999°F (-73 to 537°C) and stabilizes within 3 seconds of probe placement.

Bacharach Replacement Bulb – 25 to 120 °F

$59.00
Sling Psychrometers are used to measure the air and wet bulb temperatures, in order to determine the relative humidity and dew point temperature.

Bacharach Replacement Cap

$14.00
Replacement cap for Bacharach sling psychrometers.

Bacharach Replacement Wicks (4 Pack)

$33.50
Sling Psychrometers are used to measure the air and wet bulb temperatures, in order to determine the relative humidity and dew point temperature.

Bacharach Sling Psychrometer Accessories

$6.50$59.00
Accessories for the Bacharach sling psychrometer.

Basic Coatings Inspection Workbook

$25.00
Digital KTA Refresher Training Basic Coating Inspection Workbook.

Blotter Paper

$35.00
This package of 45 pre-cut 6" x 6" pieces of blotter paper is used to verify compressed air cleanliness.

C-2

$9.51
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.

Carson MicroBrite Illuminated Inspection Microscope

$13.99
This small but powerful (60-120X magnification), portable illuminated pocket microscope is ideal for examining coating defects.

Cath-Tech CorrReader Test Point Recorder

$1,098.56

Discount due to units needing calibration.  If current calibration is needed please call 1-800-582-4243 for pricing.

Cath-Tech CTL-3000 Analogue DCVG

$3,200.00
Cath-Tech CTL-3000 Analogue DCVG The Cath-Tech CTL-3000 Analogue DCVG is used to detect holidays in coatings on buried structures to

Cath-Tech Hexcorder Pro

$12,183.60
Cath-Tech Hexcorder Pro The Cath-Tech Hexcorder Pro was designed from the ground up to make conducting surveys a streamlined and

Cath-Tech Smart Logger II Dual Input w/ GPS

$2,835.00

Discount due to units needing calibration.  If current calibration is needed please call 1-800-582-4243 for pricing.

Certified Clemtex Hypodermic Needle Pressure Gauge

$339.00

Clemtex Hypodermic Needle Pressure Gauge

Included with the purchase of this Certified Clemtex Hypodermic Needle Pressure Gauge is a 3 point calibration certificate done by KTA's service department.  If this is not needed a non-certified version can be found by Clicking Here. Maximize your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Proper use of this gauge will measure pressure drops that are responsible for decreased production rates, increased abrasive consumption and improper anchor profile in abrasive blasting systems. Accuracy: ±5% Made in the USA.

Certified Step Blocks

$425.00
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge.  These blocks have a certificate traceable to NIST.

Chlor*Rid DTS (Direct-To-Surface) Liquid Soluble Salt Remover

$134.00
Say goodbye to salt-related rework with Chlor*Rid DTS Liquid Soluble Salt Remover.
  • Pre-mixed solution with the same salt-removing capabilities as Chlor*Rid
  • Removes chlorides, nitrates, and sulfates from surfaces
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chlor*Rid Liquid Soluble Salt Remover

$384.00
Say goodbye to salt-related rework with Chlor*Rid Liquid Soluble Salt Remover.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight
   

Chlor*Rid SP8 Gel

$380.00
Say goodbye to salt-related rework with Chlor*Rid SP8 Gel.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • Prevents flash rust
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chlor*Rid SP8 Rinse

$197.50
Say goodbye to salt-related rework with Chlor*Rid SP8 Gel & Rinse.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • Prevents flash rust
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chlor*Test Abrasive Kit

$95.00
Detection of chloride contamination on blast cleaning abrasive media is made easy using the Chlor*Test-A Kit. Complete with all of the necessary supplies to perform extraction and analysis on four samples.

Chlor*Test CSN Refill Kit

$240.00$2,260.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Test CSN SCAT Kit

$1,680.00
The Chlor*Test CSN SCAT Kit is used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Test Water Kit

$105.00
Detection of chloride contamination in water used for pressure washing/water jetting operations is made easy using the Chlor*Test-W Kit. Complete with all of the necessary supplies to perform analysis of five water samples.

Chlor*Test™ SCAT Kit

$120.00$1,075.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Wash Multipurpose Cleaner & Salt Remover

$109.75
A chemical blend that aids in the removal of road films, dirt, and chloride, sulfate, and nitrate salts.
  • Removes road films, dirt, and chloride, sulfate, and nitrate salts.
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chloride Quantab Test Strips

$74.95
The chloride Quantab test strips make testing for chlorides in a solution an easy task.  Usage is a simple as putting the strip into the test solution and waiting for the band to turn a dark color.

Clemtex Hypodermic Needle Pressure Gauge

$245.00
Clemtex hypodermic needle pressure gauge maximizes your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Made in the USA.

Coarse 0.8 to 2.5 mils (20 to 64 microns)

$38.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

Combo-Welding Gauge

$114.25
Can measure in Inch or Metric
  • Measure root size: Accurately determine the root size of your welds, crucial for maintaining structural integrity.
  • Fillet weld leg measurement: Easily assess fillet weld leg dimensions, ensuring compliance with specifications.
  • Butt weld height: Measure butt weld height with precision, vital for achieving desired weld profiles.
  • Fillet weld throat: Determine fillet weld throat dimensions accurately for optimal weld strength.
  • Angle of preparation: Gauge the angle of preparation effortlessly, facilitating precise welding setups.

Commercial Painting Inspection Kit

$2,345.00
Not sure what combination of inspection instruments you need? KTA has done the work for you with it's complete Basic Inspection Instrument Kit.

Corporate Worker Lead Protection Program

Prepared to address the requirements of the OSHA Construction Industry Lead Standard, the KTA Corporate Worker Lead Protection Program includes a Medical Surveillance Program and a Respiratory Protection Program for lead exposure projects

$500

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

Corporate Worker Safety & Health Program for Facilities Maintenance

KTA’s experience with the petrochemical and gas industries indicates that painting contractors need a corporate worker safety and health program that not only complies with 29 CFR 1926, but also selected regulations in 29 CFR 1910 (OSHA General Industry Standards).

$3,000

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

Corporate Worker Safety & Health Program for Industrial Painting Projects

Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.

$3,000

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

Corporate Worker Safety and Health Program for Construction Painting Projects

$3,000.00
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.

Corrosion and Coatings

$95.00
Introduces the various mechanisms and forms of corrosion, the prevention and control of corrosion through the use of coatings, and other practices for maintaining corrosion control.

Corrosion In reinforced concrete structures

$240.00
This book contains the fundamental aspects of corrosion in concrete, analyzed in detail.

Customizable Weld Inspection Kit

$56.50$667.00
Introducing our Customizable Weld Inspection Kit, tailored to meet your specific needs. With the freedom to select gauges and quantities, you determine which assortment is best for you.

Dakota V-Block Housing

$150.00
The Dakota V-Block Housing is made to make reading wall thickness on curved surfaces easier. This is accomplished by the

Dakota ZX-3

$1,525.00
The Dakota ZX-3 is the replacement for the popular MX-3. Supplied by default is a 5 mHz transducer which allows it to read around 6” of wall thickness.

Dakota ZX-5

$1,600.00$1,800.00
The Dakota ZX-5 is the replacement for the MX-5. The ZX-5 features settings like an alarm mode that can be configured to alert the user when out of range.

Dakota ZX-6

$1,775.00$1,975.00
The Dakota ZX-6 is the replacement for the popular MX-6. The ZX-6 features a multi echo mode that can read the wall thickness through coatings.

DE Stearns 14/20 High Voltage Holiday Detector

$4,195.00
Detect pinholes in coatings and linings greater than 20 mils thick. Variable voltage up to 35,000 volts. Select from various electrodes. Please call for pricing and availability on Spring and Flat Brush Electrodes.

DE Stearns 14/20 High Voltage Holiday/Pinhole Detector

$4,195.00
Verify a pinhole-free coating using the DE Stearns high voltage holiday detector.

DeFelsko Certified Coating Thickness Standards

$375.00
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS S1 0, 3, 10, 60 mils S2 0, 3, 10, 40 mils

DeFelsko Plastic Shims

$15.00$225.00
These convenient, pre-packaged, color-coded plastic shim sets are used to verify the accuracy of electronic dry film thickness gauges.

Delmhorst Moisture Meters

$375.00$390.00
Delmhorst, a leader in moisture detection instrumentation offers a series of precision, battery-operated instruments for detecting moisture in wood, gypsum, plaster, concrete and other materials of construction.

Dial Depth Pit Gauge

$467.50
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.

Dickson Temperature/HumidityRecorder 24-Hour Charts 415

$57.50
The Dickson TH8P3 is a portable device which automatically records the air temperature (-20-120°F) and humidity (0-110%) 24-hours/day, seven days per week, providing a permanent record, even when you can't be on-site.

Dickson Temperature/HumidityRecorder 7-Day Charts 417

$54.00
The Dickson TH8P3 is a portable device which automatically records the air temperature (-20-120°F) and humidity (0-110%) 24-hours/day, seven days per week, providing a permanent record, even when you can't be on-site.

Dickson TH8P3

$739.00
The Dickson TH8P3 is a portable device which automatically records the air temperature (-20-120°F) and humidity (0-110%) 24-hours/day, seven days per week, providing a permanent record, even when you can't be on-site.

DPMA Probe for Wind and Environmental Readings

$545.00
Positector 6000 DPMA Probe The Positector 6000 DPMA probe is the perfect solution for gathering ambient conditions in the field.

DPMD Probe for Internal Tank and Pipe Measurements

$445.00
Positector 6000 DPMD Probe The Positector 6000 DPMD probe is designed for insertion into tanks and pipes to get your

E2TM (includes magnetic pick-up)

$10.15
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.

Economy Single Purpose Hi-Lo Welding Gage

$56.50
  • Root Weld Space
  • Eliminate Rejects - Improves Productivity
  • Internal Misalignment
  • Delivered with a protective leather-like carry pouch
Measures in Inches

Extech HD500 Psychrometer

$323.50
Reading options include air temperature, relative humidity, dew point and wet bulb!

Fischer MP0 and MP0R

$531.25$845.75
Contact us about quantity discounts on all Fischer MP0 and MP0R gages.

FLIR T420bx Thermal Imaging Camera

$7,140.00
FLIR T420bx Thermal Imaging Camera The FLIR T420bx infrared camera has a 320×240 pixel resolution  that can be increased to

Fluke 117 Multimeter

$220.00$288.00
Fluke 117 Multimeter The Fluke 117 Multimeter is perfect for use in the field for any electrical measurements you may

Fluke 375 FC True-RMS AC/DC Clamp Meter

$667.00
The Fluke 375 FC is the perfect tool for a CWI to check current without disconnecting any wires.  It boasts

Fluke 561 Infrared Thermometer

$234.99
Fluke 561 Infrared Thermometer The Fluke 561 is a powerful infrared thermometer capable of reading temperatures between -40°F to 1022°F

Fluke 62 MAX Infrared Thermometer Calibrated

$230.00$298.00
Fluke 62 MAX Infrared Thermometer measures temperature in transformers, motors, pumps, panels, breakers, compressors, duct, and much more!

Fluke 971

$400.61
The 971 is a rugged relative humidity and temperature meter.  Housed in a light weight and drop resistant case it

Fluke a3000 FC Clamp Meter

$249.05
Fluke a3000 FC Clamp Meter The Fluke a3000 FC clamp meter is designed so that you can get all of

Form 2A Opacity Chart (250 pk)

$59.00
Black and white sealed opacity chart. The top is black and the bottom is white. Size: 5-1/2 x 10 in (140 x 254 mm).

Form 2C Opacity Chart (250 pk)

$72.25
Black and white sealed opacity chart. The top is black and the bottom is white. Size: 7-5/8 x 10-1/4 in (194 x 260 mm).

Form 2DX Brushout Card (500 pk)

$56.75
Leneta Form 2DX Brushout Card. Sealed black and white Brushout Card. The top half is black and the bottom half is white. Size: 3-7/8 x 6 in (98 x 152 mm).

Form 3B Opacity Chart (250 pk)

$75.90
Leneta Form 3B Opacity Chart. Black and white sealed opacity chart. The top and bottom are white, middle section is black. Size: 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 5C Opacity Chart (250 pk)

$72.50
Black and white sealed opacity chart. The top half is white and the bottom half is black. Size: 7-5/8 x 10-1/4 in (194 x 260 mm).

Form 5DX Brushout Card (500 pk)

$56.75
Form 5DX is a sealed black and white Brushout Card. The top half is white and the bottom half is black with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form M12 Spray Monitor (2000 pk)

$91.00
Black and white checkerboard pattern spray monitor. Size: 1 x 1 in (25 x 25 mm). Leneta Form M12 Spray Monitor

Form WB Plain White Chart (250 pk)

$71.25
Form WB is a sealed Plain White Chart with overall dimensions of 7-5/8 x 11-1/4 in (194 x 286 mm). Leneta Form WB Plain White Chart.

Form WDX Plain White Card (125 pk)

$52.25
Sealed plain white Brushout Card. Size: 3-7/8 x 6 in (98 x 152 mm). Leneta Form WDX Plain White Card.

Hach Demineralizer

$34.00
Hach Demineralizer The Hach Demineralizer contains monobed resin which is perfect for use in deionizing small amounts of water.  The

Hi-Lo Welding Gauge

$138.50
  • Measures internal alignment of pipe after fit-up/alignment, cuts radiographic rejects
  • Measures internal misalignment of pipe before and after tracking
  • Measurement Scale: Inches on one side and Metric on the opposite side
  • Stainless Steel
  • Satisfies Fit-Up codes, ASME, ANSI, API & Military

Hold*Blast Surface Passivator

$210.00
Prevent flash rust with Hold*Blast Surface Passivator.
  • Prevents the formation of flash rust, by chemically changing the active surface of metal to a much less reactive state.
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight

HTK-2LT LED Inspection Mirror

$21.08
HTK-2LT LED Inspection Mirror Stainless steel handle telescopes from 6 3/4″ to 30″. 2 1/4″ x 3 1/2″ rectangular lighted

HTS-2LT Illuminated Inspection Mirror

$23.56
HTS-2LT Illuminated Inspection Mirror Stainless steel handle telescopes from 6 3/4″ to 30″. 3 3/8″ Diameter. All angle ball joint

Hypodermic Needle Pressure Gauge

$13.75$339.00
Maximize your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Made in the USA.

ICRI Surface Finish Comparators

$210.00
Assess the relative roughness of concrete using this set of 10 rubber placards.

Illuminated Magnifier-10X

$28.00
Illuminated Magnifier-10X This illuminated 10-power magnifier is used to assess surface dust concentrations per ISO 8502, Part 3 – Assessment

Illuminated Magnifier-5X

$38.50
This large view, illuminated 5-power magnifier is ideal for observing coating defects, or when used in conjunction with the Keane-Tator Comparators, can be used to assess surface profile depth.

Inspection Mirrors

$9.51$23.56
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas. Discover a range of cost-effective, top-tier inspection mirrors in various sizes, perfect for hassle-free exploration of hard-to-reach spots.

Insta-Chek Surface pH Pencil

$40.00
Convenient pencils measure the pH of a surface in the range of pH 0-13. Sold in packs of 3.

Intrinsically Safe Night Stick Polymer Dual Light

$46.00
It acts as a conventional flashlight, has a floodlight, and can operate as a dual-light with a shirt pocket clip for safety while walking through plants or poorly lit facilities!

ISO Surface Cleanliness Standards

$375.00
Using the ISO Standards can reduce the degree of subjectivity associated with evaluating surface cleanliness.

K-2

$9.52
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.

Keane-Tator Illumintated Magnifier 372

$49.95
Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.

Keane-Tator Surface Profile Comparator

$49.95$360.00
Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.

Keane-Tator Surface Profile Comparator 372/3

$360.00
Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.

Keane-Tator Surface Profile Grit/Slag Comparator Disc 372/G

$115.00

Keane-Tator Surface Profile Grit/Slag Comparator Disc 372/G

Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.

Keane-Tator Surface Profile Sand Comparator Disc 372/S

$115.00
Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.

Keane-Tator Surface Profile Shot Comparator Disc 372/SH

$115.00
Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.

Kestrel Drop

$99.00$129.00
The Kestrel Drop is a compact data logger that is able to display readings directly to a mobile device over

KTA 2mm Cross Cut Guide

$150.00
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

KTA 914 Non-Contact Infrared Thermometer

$49.99$99.99
The KTA Non-Contact Infrared Thermometer is engineered for accurate temperature measurement ensuring precision and efficiency in every evaluation. With its rapid and accurate infrared technology, this IR Thermometer provides instant surface temperature readings, aiding in meticulous inspections without contact. Its user-friendly design and reliable performance make it an indispensable asset for professionals seeking precision in coatings analysis, enabling swift and accurate assessments for superior quality control. The 12:1 distance to spot size makes gathering the average reading of an entire wall to a precise point an easy task.

KTA Abrasive Blasting Conductivity Kit

$475.00
KTA Abrasive Blasting Conductivity Kit The abrasive blasting conductivity kit comes with step by step instructions that provide guidance on

KTA Advanced Inspection KIT

$2,150.00
KTA Advanced Coating Inspection KIT The KTA Advanced inspection kit contains everything you should need for an inspection.  The Positector

KTA Aluminum Wet Film Thickness Gauge (25 Pack)

$45.00
These credit card-sized (2.25" x 3.25") inexpensive, lightweight aluminum notch-type gauges contain a silk screened KTA logo and contact information, and are used measure the thickness of the wet paint film immediately after application.

KTA Basic Certified Inspection Kit

$75.00$1,725.00
Not sure what combination of inspection instruments you need?  The KTA Basic CERTIFIED Instrument Kit has you covered!.

KTA Bresle Kit – 3

$365.00
KTA Bresle Kit 3  KTA Kits are used to extract surface samples and analyze the samples for chlorides and other

KTA Bresle SCAT Kit 1

$5.00$615.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

KTA Certified Basic Inspection Instrument Kit

$1,725.00
NEW Certified Basic Kit! Not sure what combination of inspection instruments you need? KTA has done the work for you with it's complete Basic Inspection Instrument Kit.

KTA Cross Cut Guide Adhesion Test Kit

$4.50$250.00
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

KTA Cross Cut Guide Kit CCG-2MM

$250.00
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

KTA Pipeline Inspection Kit

$2,500.00
Pipeline Inspection Kit compiled by KTA is designed for those who aren't sure what combination of instruments they need for the Pipeline Industry.

KTA POG (Pressure Orifice Gage)

$95.00
KTA POG (Pressure Orifice Gage) The KTA POG measures the orifice size of an abrasive blast cleaning nozzle. This nozzle

KTA Swab SCAT Kit

$300.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

KTA Test Panels – Call To Order

KTA-Tator, Inc. fabricates a variety of test panel sizes. Commercial grade hot-rolled carbon steel panels are available with mill scale or abrasive blast cleaned. Please "Contact Us" to inquire about our line of steel test panels. Our staff will be happy to explain all of the sizes and finishing options that are available, and to provide you with pricing, including shipping options and charges. Fabricated in the USA. Call To Order

KTA X-Cut Guide Kit

$7.50$256.00
One of the most frequently performed physical tests conducted on in-place coating systems is tape/knife adhesion. Performing this test in

KTA-Bresle SCAT Kit I

$615.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

KTA-Bresle SCAT Kit II

$860.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

KTA-Chlor*Test CSN SCAT Kit

$240.00$1,680.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

KTA-Swab SCAT Kit

$15.00$300.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

KTA-Tator Certified Stainless Steel Wet Film Thickness Gauge

$79.99
KTA Tator Wet Film Thickness Gauge reads both mills and microns. This revolutionary Gauge will change they way you measure WFT.

M1 (Battery Operated) 67.5v

$465.00
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.

Moh’s Hardness Test For Concrete

$122.00
Mohs' Hardness Test Set for Materials Testing-Concrete

NACE Surface Finish Weld Replica

$80.00
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. A copy of the NACE standard is included with your purchase. Made in the USA.

NIST Calibration Standards

$1,025.00
These traceable chrome plated steel test blocks are used to verify the accuracy of magnetic dry film thickness gauges.

Octagon Wet Film Thickness Gauge

$10.00
Octagon Wet Film Thickness Gauge The octagon wet film thickness gauge is the perfect option if a high reading range

Paint Adhesion Test Kit

$119.95$199.00
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

Paint Adhesion Test Kit (Blade Sold Separate)

$199.00
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

Pelican 1400 Carrying Case

$124.95
Pelican 1400 Lifetime Warranty is waterproof, crushproof, and dustproof. Equipped with easy open latches and a foam insert for complete protection.

Pelican 1500 Protector Case

$183.95
The Pelican 1500 Protector Case features a rugged design that is watertight, crushproof, and dustproof to handle the most demanding environments. Made in The USA.

Pelican 1525 Air Case

$220.95
The Pelican 1525 Air Case is up to 40% lighter than traditional alternatives without compromising on durability and features a limited lifetime warranty.

Pelican 1557 Air Case

$279.95
Discover the cutting-edge Pelican 1557 Air cases, a pinnacle of innovation from the protective case pioneers. Up to 40% lighter, waterproof, crushproof, and dustproof, these cases feature Press and Pull™ Latches, user-customizable Pick N Pluck™ foam, a fold-down over-molded handle, and a waterproof O-ring seal

Pelican 1620 Protector Case

$351.95
The Pelican 1620 Protector Case features interior dimensions of 21.48" x 16.42" x 12/54" with an extension handle and wheels for easy travel.

Pelican 3345 Dual Flashlight

$56.00
Pelican™ 3345 VLO examines the ambient light/proximity and instantly adjusts its lumens to the most effective level.

Pelican 7100 LED Flashlight

$105.95
Pelican 7100 LED Flashlight The Pelican 7100 LED Flashlight is a compact but powerful device.  Capable of up to 695

Pelican 7600 Flashlight

$106.95
The Pelican 7600 flashlight is a compact light offering 944 lumens of power.  Running off a single lithium ion battery

Pelican 9410L Floodlight

$378.95
The Pelican 9410L Floodlight is powerful with an output of 2207 lumens.  Four LEDs and lithium-ion batteries allow all this

pH Colorfast Strips

$27.50
Pack of 100 Colorfast strips for measuring the pH of surfaces or solutions. Four-color match system enables more precise measurements

Pipe Pit Gauge

$65.00
The Pipe Pit Gauge fits neatly into the leather case and can be easily carried in one's pocket. It will serve as a constant guide for judging the condition of the pipe. Useful formulas, tables, and data giving O.D., wall thickness, and weight per foot for various pipes are etched on the gauge. It should be in the hands of every field superintendent, engineer, or foreman working with pipe.

PosiPen

$265.00
Equipped with the smallest probe of any magnetic pull-off gauge, the PosiPen is a miniature (5.5" long) gauge that measures the thickness of any non-magnetic coating applied to a ferrous substrate.

PosiTector DPMIR Probe

$500.00
Positector DPMIR Probe The Positector DPMIR probe has everything you need to get your ambient conditions.  Just snap this probe

PosiTector Inspection Kit

$0.00
Build your own Positector Inspection Kit.  Simply select what items below you would like in it and add to cart.  For more information on any of the items hover over the picture.

Positector IRT Probe

$195.00
The Positector IRT probe offers an affordable way to add infrared capability to a Positector 6000 body.

Positector Kit F1

$1,570.00
The Positector F1 Inspection kit contains everything needed to perform a basic coating inspection kit.  Included with purchase is a

PosiTector Probe Extender

$205.00
The Positector probe extender allows users to attach their existing Positector 6000 cabled probes to it to take readings in

PosiTector RTR 3D Replica Tape Reader Bundle

$50.00$1,995.00
Replica Tape Reader is used to measure and record 2D/3D Surface Profile Parameters using optical grade replica tape.

PosiTector SHD Probe

$555.00
The PosiTector SHD Shore Hardnesss Durometer is a handheld electronic instrument that measures the indentation hardness of non-metallic materials.

Positest Air Leak Tester

$2,895.00
Quickly and easily detect air and water leaks in building envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems!

Positest Air Leak Tester Solution

$115.00
A replacement case of 16 bottles of the PosiTest Air Leak Tester solution.

PosiTest AT 50 mm C1583 Conversion Kit

$535.00
Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes

Positest AT 50 MM Kit (to use concrete dollies)

$300.00
Conversion kit to turn an existing 20 mm PosiTest adhesion tester into a 50 mm variant.  Included with the kit

PosiTest AT 50 mm x 50 mm Tile Conversion Kit

$505.00
Ideal for measuring the tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives Conforms to BS EN 12004-2

PosiTest AT-Automatic Kit

$2,935.00
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.

PosiTest AT-Manual Kit

$2,195.00
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.

Positest LPD Holiday Detector Basic Kit

$475.00
Defelsko Positest LPD Holiday Detector Holiday detection has never been easier with the Defelsko Positest LPD.  Its lightweight ergonomic design

PosiTest OTL Logger Only

$945.00
  • Precisely records temperature profiles
  • Stores up to 40,000 datasets in 6 independent batches
  • 6 K-type thermocouple ports
  • Includes the NEW Cure Index feature
  • Easy data management with PosiSoft Desktop Software
  • Wide probe variety available (6', 12', 20') (sold separately)

PosiTest® CMM

$575.00

Concrete Moisture Meter non-destructively measures the moisture content of concrete in accordance with ASTM F2659

The PosiTest CMM Concrete Moisture Meter is the fast, non-destructive impedance meter ideal for inspectors looking to quickly evaluate the moisture condition in concrete slabs.

Conforms to ASTM F2659

PosiTest® OTL (Oven Temperature Logger) Kits & Probes

$20.00$2,795.00
  • Precisely records temperature profiles
  • Stores up to 40,000 datasets in 6 independent batches
  • High-temperature stainless steel box with insulation
  • 6 K-type thermocouple ports
  • Includes the NEW Cure Index feature
  • Easy data management with PosiSoft Desktop Software
  • Wide probe variety available (6', 12', 20') (sold separately)
The XT kit features an enhanced holder with heatsink for greater endurance at high temperatures.

PosiTest® OTL Kit

$2,295.00
  • Precisely records temperature profiles
  • Stores up to 40,000 datasets in 6 independent batches
  • High-temperature stainless steel box with insulation
  • 6 K-type thermocouple ports
  • Includes the NEW Cure Index feature
  • Easy data management with PosiSoft Desktop Software
  • Wide probe variety available (6', 12', 20')

PosiTest® OTL XT Kit

$2,795.00
Features enhanced holder with heatsink for greater endurance at high temperatures.
  • Precisely records temperature profiles
  • Stores up to 40,000 datasets in 6 independent batches
  • High-temperature stainless steel box with insulation
  • 6 K-type thermocouple ports
  • Includes the NEW Cure Index feature
  • Easy data management with PosiSoft Desktop Software
  • Wide probe variety available (6', 12', 20')

Powder Comb Thickness Gauge

$45.00
These small pocket-sized aluminum gauges are uniquely designed to measure the thickness of powder coatings after application but before they are cured.

Protimeter Aquant Nondestructive Moisture Meter

$461.00
NEW Design!! Locating moisture in building walls is made simple with the Aquant Moisture Detector manufactured by Protimeter.

Psychro-Dyne Psychrometer

$175.00
Battery-powered psychrometers are used to measure the air and wet bulb temperatures, in order to determine the relative humidity and dew point temperature.

PTC Durometers

$750.00$999.95
Measure the indention/penetration hardness of plastics, rubber and thick film coatings in the laboratory, shop or field according to ASTM D2240 using the PTC Durometer Hardness Tester.

Qnix 1500

$925.00$1,250.00
The durable, portable Qnix 1500 measures the thickness of coatings (0-200 mils or 0-5000 microns) applied to both ferrous and non-ferrous metal substrates.

QNix 5500

$977.73
The QNix®5500 is easy to handle, precise, extremely robust, designed for long-term use and optimally designed for quick coating checks.

QNix 9500

$1,466.05
The QNix®9500 coating thickness gauge is a great choice for measurement applications with requirements for storing measured values, archiving, creating

QP-1 Coatings Quality Control Program

Prepared specifically for industrial painting contractors, this written quality control program has been completely updated to conform to the management, technical and quality control requirements of the AMPP-QP1 Contractor Certification Program.

$1,500

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

QP-2 Deleading Compliance Program

Prepared under the direction of a Certified Industrial Hygienist, the KTA Corporate Deleading Compliance Program addresses the protection of workers, management of releases of lead to air, soils and waters, and management of waste streams. The program provides policies and guidance in each of these three general areas, and is based upon existing Federal regulations.

$1,500

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

QP-3 Quality Control Program

Developed by an SSPC certified Protective Coatings Specialist, this Quality Control Program addresses the latest requirements of SSPC: The Society for Protective Coatings QP-3 certification program.

$2,000

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

QP-3 Worker Safety and Health Program

This Corporate Worker Safety and Health Program conforms to the criteria of SSPC: The Society for Protective Coatings Qualification Procedure No. 3 (QP 3) Standard Procedure for Evaluating Qualifications of Shop Painting Applicators. The program is designed to be used in conjunction with a current copy of 29 CFR 1910 (not included).

$3,000

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

QP-6 Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures Quality Control Manual

KTA has developed a Quality Control Manual for metallizing, written by an SSPC Certified Protective Coating Specialist with over 35 years of experience in the coatings industry, that meets the requirements of the most recent version of the QP-6 certification standard. Contact Lisa Bowermister (lbowermeister@kta.com/412-746-4247) to Order

Replacement 20mm Pull Stubs

$35.00$300.00
Replacement 20 mm pull stubs or dollies for the PosiTest brand adhesion testers.  Sold in either 10 or 100 packs.

Replacement 50mm Pull Stubs (package of 4)

$50.00
Replacement 50 mm pull stubs or dollies for the PosiTest brand adhesion testers.

Replacement Cross Cut Knife Blades (10 Pack)

$4.50
Replacement Cross Cut Knife Blades Designed for use with the Stanley utility knife that is included in the KTA Cross

Replacement EM Quant Ferrous Ion Indicator Strips

$116.00
Replacement EM Quant Ferrous Ion Indicator Strips

Replacement Needle

$13.75
Maximize your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Made in the USA.

Replacement PH Paper (1-12 double roll)

$15.00
Replacement PH paper with a range of 1-12.

Replacement pH paper (4-9 double roll)

$15.00
Wide range from 4.0 to 9.0, with 10 dispensers per carton for 2000 tests.

Replacement Probe ID Tags (6) for PosiTest OTL

$20.00
Six (6) replacement engraved ID tags for temperature probes.

Replacement syringe with needle

$5.00
Syringe w/needle for use with the Bresle method of testing for salts.

Rilem Putty

$28.50
The Rilem Putty is used to attach the Rilem Tube to vertical surfaces.

Rilem Tube

$28.50
Vertical Rilem Tubes are used to measure the rate at which water moves through porous materials like masonry.

Rilem Tubes

Vertical Rilem Tubes are used to measure the rate at which water moves through porous materials like masonry. The Rilem Putty is used to attach the Rilem Tube to vertical surfaces.

S-2

$11.65
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.

Skew-T Fillet Weld Gauge

$127.50
Used to:
  • Check the inspection dimension of an acute and obtuse dihedral angle weldment
  • The angle of the vertical member

Sling Psychrometer

$130.00
Sling Psychrometers are used to measure the air and wet bulb temperatures to determine the relative humidity and dew point temperature. This product comes Calibrated from the Manufacturer.

Spectroline Opti-Lux 365 OLX-365B Blacklight

$525.00
With a lightweight and compact body, the OPTI-LUX 365B greatly reduces user fatigue. It gets into tight, cramped places that larger lamps can’t. The flashlight has a coverage area of up to 2.5 inches (6.4 cm) in diameter at a distance of 15 inches (38.1 cm). This versatile unit produces an extremely uniform beam profile for both sample viewing and photography. Powered by one rechargeable lithium-ion battery (extra battery included in kit), the OPTI-LUX 365 provides four hours of continuous inspection time. The rugged, anodized aluminum lamp body minimizes corrosion and stands up to years of heavy use. This UV-A LED inspection flashlight comes complete with a lanyard, belt holster, two rechargeable batteries, smart 2-position charging cradle with AC and DC power cords, and UV-absorbing spectacles, all conveniently packaged in a padded carrying case

Spectroline Vintage 365

$599.00
The spectroline Vintage 365 is a modern handheld UV inspection lamp for detecting hydrocarbon oil contamination.

Spy 670 Low Voltage Pinhole Detector

$440.00
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.

Spy Low Voltage Wet Sponge Holiday-Pinhole Detector

$440.00
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.

SSPC Pocket Guide to Coating Information

$20.00
This handy pocket guide is packed with information and formulas commonly referenced during coatings work, including information on corrosion, surface preparation, soluble salt detection, coating application, International Marine Regulations, concrete standards and inspection. This Guide is a "must have" for anyone involved with industrial coatings.

SSPC Surface Preparation Specifications and Practices

$180.00
Surface preparation standards for solvent cleaning, hand and power tool cleaning, abrasive blast cleaning, water jetting and preparation of concrete for coatings are all provided in this single source, soft bound publication produced by SSPC: The Society for Protective Coatings.

SSPC Vis Guides

$195.00
Using the SSPC visual guide can reduce the degree of subjectivity associated with evaluating surface cleanliness. There are a total

Stainless Steel Burnishing Tool

$10.00
Stainless Steel Burnishing Tool is perfect for use with Testex replica tape. This burnishing tool is designed to be much more durable than its plastic counterparts.  With its stainless steel construction, you no longer have to worry about breaking your burnishing too while on the job!

Steel Test Panels

$99.50
Hot Rolled Steel Panels | 10 pack SP-10 Blast 2-3mil profile
  • 3" x 6" x 1/8"
  • 3" X 6" x 1/4"
  • 4" x 6" x 1/8"
  • 4" x 6" x 1/4"

Surface Coatings for protection against wear

$270.00
This book covers coating characterization and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings and discusses the various methods used to deposit wear resistance coatings.

Testex Optical Replica Tape – For use with RTR3D

$50.00
Testex optical replica tape is used in conjunction with a Defelsko RTR 3D Probe to measure surface profile according to Method C in ASTM D4417.

Testex X-Coarse Plus 4.6 to 5 mils (116 to 127 microns)

$50.00
Testex X-Coarse Plus 4.6 to 5 Mil replica tape is used with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

The Concrete Profiler

$127.00
Permanently replicate the roughness of concrete surfaces prior to coating using The Concrete Profiler or TCP.

The Paint Inspectors Field Guide

$195.00
For protective coating inspection. An Inspection aid and guide produced for the inspector, by an inspector. This field guide was developed to offer guidance, experience and assistance to protective coating inspectors, specifiers, owners, and painting contractors. The book is complemented by a wide range of inspection and experience notes, with additional photos of coatings issues.

Tinker-Rasor Water Wetter

$14.50
Water wetter to help improve the viscosity of water for low voltage wet sponge holiday detecting.

Tooke Gauge

$75.00$1,380.00
Measure the thickness of individual coating layers (must be alternating or different colored layers) after the fact using the Tooke Gauge. This powerful gauge is hand-held and portable, and can be used over nearly any type of substrate.

TQC Concrete Moisture Meter

$595.00
Non-destructive digital moisture meter for concrete.

TQC Dust Tape Kit

$175.00
The TQC dust tape kit has everything needed to perform tests in accordance with ISO 8502-3 and JIS Z 0313 to verify that there is no dust on the surface.

Turbo Fuse Adhesive

$22.00
Glue your adhesion testing dollies using our Turbo Fuse instant bonding adhesive.

Ultrasonic Couplant

$21.00
Ultrasonic couplant is used to couple ultrasonic gauges to the surface they are reading on.  The gel like consistency of

US Weather Bureau Psychrometric Tables (WB-235)

$6.50
The US Weather Bureau Psychrometric Tables are used for determining the relative humidity and dew point temperature from the dry and wet bulb temperature readings on sling or battery-powered psychrometers. The tables cover the range of 23.0 to 30.0 inches barometric pressure.

Using Coatings Inspection Instruments 3rd Edition

$75.00
Completely updated, the 3rd edition includes instructions on the step-by-step use of 50 instruments and test kits for measuring ambient conditions (including electronic psychrometers), surface profile (including two digital depth micrometers and a new procedure for use of replica tape), SSPC visual guides, wet and dry film thickness, concrete testing, destructive coating thickness measurement, adhesion, holiday/pinhole detection and coating hardness. An updated list of surface cleanliness standards, an updated index of industry standards, and a new surface salt extraction and analysis procedure are also included.

Vaprecision Calcium Chloride Vapor Emission Test Kit

$39.00
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.

Viscosity Cups

$154.00$160.00
Measure the viscosity of coatings prior to application quickly and easily in the field using viscosity cups.

Wagner Rapid RH L6

$212.00$1,785.00
The Wagner Rapid RH L6 makes performing ASTM F2170 an easy task.  To use the Rapid RH L6 a Smart

Wall Mount Hygrometer/Thermometer

$175.00
This maintenance-free wall mount hygrometer equipped with a dual readout displays the temperature (0-160°F; -19.9-69.8°C) digitally and the humidity (20-100%) on an analog dial for simultaneous monitoring, in either °F or °C (switchable).

Wolf Wilburn Pencil Hardness Tester

$507.00
The Wolf Wilburn Pencil Hardness Tester is a scratch type hardness tester.  It utilizes a weighted cart to apply even

X-Coarse 1.5 to 4.5 mils (38 to 115 microns)

$38.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

Ames Dial Micrometer

$190.00$194.00
Measure the thickness of disbonded paint chip samples or verify the thickness of plastic shims using this small, portable, precision, spring-loaded dial micrometer manufactured by Ames.

Barcol Impressor Hardness Tester

$1,416.00
Measure the hardness of aluminum, aluminum alloys, copper, brass, fiberglass, plastics and other materials in the laboratory, shop or field according to ASTM D2583 using the Barcol Impressor Hardness Tester.

Byko Test

$595.00
The Byko Test is a compact and affordable dry film thickness gauge capable of reading 0-79 mils on both ferrous

Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)

$119.95
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will

Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)

$119.95
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

Kestrel 1000 Pocket Wind Meter

$111.00
Kestrel 1000 Pocket Wind Meter Overview Here’s the one that started it all! Measuring wind is a breeze with the

Kestrel 2500 Pocket Weather Meter

$199.00
Kestrel 2500 Pocket Weather Meter Overview The Kestrel 2500 takes the great features of the Kestrel 2000 and adds in

Kestrel 3000 Pocket Weather Meter

$199.00
Kestrel 3000 Pocket Weather Meter The Kestrel 3000 Pocket Weather Meter is the handheld weather-monitoring device that provides a wide

Kestrel 5000 Environmental Meter

$285.00
Kestrel 5000 Environmental Meter Overview Used in firefighting, agriculture, hazardous materials response, meteorology, military, law enforcement, research, education, scientific &

Kestrel 5000 Environmental Meter with LiNK

$325.00
Kestrel 5000 Environmental Meter with LiNK The next generation of environmental conditions monitoring is the here with the Kestrel 5000

Kestrel 5500 Rugged Weather Meter

$305.00
Kestrel 5500 Rugged Weather Meter Quick Look: Measures wind speed, temperature, humidity, pressure and direction. 14 total meteorological parameters measured,

Kestrel 5500 Rugged Weather Meter with LiNK

$415.00
Kestrel 5500 Rugged Weather Meter with LiNK Quick Look: Measures wind speed, temperature, humidity, pressure and direction. 14 total meteorological

KTA X-Cut Guide Package

$256.00
The KTA X-Cut Guide Package allows for in-place tape/kinfe adhesion testing of a coatings system in accordance with ASTM D3359.

OG212 Aluminum Tooke Gauge

$1,380.00
Mark II (OG212) Aluminum Range: 0-50 mils

OG214 Plastic Tooke Gauge

$964.00
Mark IV (OG214) Plastic Range:0-50 mils

PosiTest® PC Powder Checker

$2,595.00

Non-contact Uncured Powder Thickness Gage

Using non-contact ultrasonic technology, the PosiTest PC measures uncured powder coatings to predict a cured thickness.
  • Dedicated stand-alone unit is ready to measure right out of the box
  • Up to 4x faster measurement speed*—ideal for moving lines and swinging parts
  • No calibration adjustment required for most powders
  • Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop Software
  • Scan Mode continuously takes measurements—ideal for analyzing large areas
Conforms to ASTM D7378

Spectro 1 Pro

$300.00
Compact and affordable color meter. Connect to the Spectro App to compare and save color samples with a push of a button.

SST Probe

$400.00
Positector SST Soluble Salt Tester The Positector SST Soluble Salt Tester can be used to measure the concentration of soluble

Standard Memory Body

$325.00
Defelsko Positector 6000 Standard Body

DeFelsko PosiTest LPD Holiday Detector Complete Kit

$1,220.00
DeFelsko Positest LPD Holiday Detector Complete Kit The Defelsko holiday detector makes testing easier than ever before.  With the Defelsko

Dickson TH8P3 and Accessories

$54.00$739.00
The Dickson TH8P3 is a portable device which automatically records the air temperature (-20-120°F) and humidity (0-110%) 24-hours/day, seven days per week, providing a permanent record, even when you can't be on-site.

KTA X-Cut Guide

$75.00
KTA X-Cut Guide The KTA X-Cut Guide is designed specifically to conform with ASTM D3359 Method A, coatings > 5

Medium Blade PA2054 1.5mm spacing – 11 teeth (Blade Only)

$119.95
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

PosiTector SST DeFelsko Patch Kit

$675.00
Positector SST Defelsko Patch Kit This kit comes with all of the supplies needed to get started using the SST

PosiTector SST Latex Patch Kit

$730.00
Positector SST Latex Patch Kit This SST kit comes with all the stuff you need to get started using the

PosiTector SST PosiPatch Kit

$840.00
Positector SST PosiPatch Kit The Positector SST PosiPatch kit contains everything you need to get started using the Defelsko PosiPatch

Coarse Blade PA2056 2mm spacing – 6 teeth (Blade Only)

$119.95
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

Cross Cut Knife

$7.50
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

Cross Hatch Tape

$49.95
M.E. Taylor Cross Hatch Tape Designed with ASTM D3359-17 in mind the M.E. Taylor cross hatch tape is perfect for

DeFelsko Adhesive Patches (25 Patches)

$95.00
Defelsko Adhesive Patches These Defelsko Adhesive Patches use a low-tack adhesive to make removal a simple process.  Since these patches

PosiPatch Magnetic Ring

$195.00
PosiPatch Magnetic Ring The PosiPatch Magnetic Ring is used in conjunction with the PosiPatches. This ring allows you to gather

PosiPatch Replacement Patches (24 Pack)

$275.00
PosiPatch Replacement Patches The PosiPatch Replacement Patches are used in conjunction with the PosiPatch Magnetic Ring these patches allow you

PosiPatch Replacement Patches (5 Pack)

$90.00
PosiPatch Replacement Patches The PosiPatch Replacement Patches are used in conjunction with the PosiPatch Magnetic Ring these patches allow you

Positector 6000 Advanced Memory Body

$775.00
Unlock full potential of Positector probes with Defelsko Positector 6000 Advanced Memory Body. Enhance measurements and streamline data for peak performance.

SST Latex Patches (25 Patches)

$145.00
SST Latex Patches These SST Latex Bresle style patches use a latex adhesive to adhere to the testing surface. They

Training Surface

$25.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

LPD Replacement Sponges

$15.00
LPD Replacement Sponges When time comes to replace the sponge on your LPD we have you covered.  This 3 pack

Posipatch Plastic Dispensing tip (10 Pack)

$40.00
PosiPatch Plastic Dispensing Tip These plastic tips allow you to seamlessly access the port of the PosiPatch.  Since there is

Very Coarse Blade PA2057 3mm spacing – 6 teeth (Blade Only)

$119.95
PA2000 3mm 6 Teeth Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will allow

Elcometer 106 Compatible Blast Cleaned Dollies (20 Pack)

$45.00
20 mm dollies for use with Elcometer 106 adhesion testers.

Hardman Double Bubble Fast Setting Epoxy (10 Pack)

$15.50
Our various means to glue your adhesion testing dollies. We still distribute 20mm blast cleaned dollies for the Elcometer 106 series adhesion tester.

LPD 8×8 Sponge Pack

$25.00
LPD 8×8 Sponge Pack The LPD 8×8 Sponge pack is perfect for people who want to use the LPD on

PosiTector SmartLink

$555.00
Positector SmartLink Coating Thickness Gauge The PosiTector SmartLink and free mobile app. Turn your cell phone or tablet into a

UTG Corrosion Probe

$750.00
UTG Corrosion Probe 2-300 mils wood,concrete,composite material and more

UTG Multiple Echo Probe 0.1″-5.0″

$1,590.00
UTG Multiple Echo Probe 0.040-5.0 Measure wall thickness of pipe, and other steel substructure

FRS Cabled Right Angle Probe 0-60 mils Ferrous Substrate

$555.00
FRS Cabled Right Angle Probe 0-60 mils Ferrous Substrate

FTS Cabled Probe 0-250 mils Ferrous Substrate

$610.00
FTS Cabled Probe 0-250 mils Ferrous Substrate

FTRS Cabled Right Angle Probe 0-250 mils Ferrous Substrate

$670.00
Positector 6000 FTRS Cabled Right Angle Probe The FTRS Cabled Right Angle Probe is designed for the areas that don’t

FHXS High Heat Cabled Probe 0-400 Mils Ferrous Substrate

$1,115.00
FHXS High Heat Cabled Probe 0-400 Mils Ferrous Substrate

FKS Cabled Probe 0-500 mils Ferrous Substrate

$670.00
FKS Cabled Probe 0-500 mils Ferrous Substrate

FLS Cabled Probe 0-1500 mils Ferrous Substrate

$1,235.00
FLS Cabled Probe 0-1500 mils Ferrous Substrate

F45S Cabled Angle Probe 0-45 mils Ferrous Substrate

$780.00
F45S Cabled Angle Probe 0-45 mils Ferrous Substrate

F90S Cabled Right Angle Probe 0-45 mils Ferrous Substrate

$780.00
F90S Cabled Right Angle Probe 0-45 mils Ferrous Substrate

NS Cabled Probe 0-60 mils Non Ferrous Substrate

$575.00
NS Cabled Probe 0-60 mils Non Ferrous Substrate

NRS Cabled Right Angle Probe 0-60 mils Non Ferrous Substrate

$640.00
NRS Cabled Right Angle Probe 0-60 mils Non Ferrous Substrate

NAS Cabled Probe 0-25 mils Non Ferrous Substrate

$780.00
NAS Cabled Probe 0-25 mils Non Ferrous Substrate

N0S Cabled Probe 0-25 mils Non Ferrous Substrate

$780.00
N0S Cabled Probe 0-45 mils Non Ferrous Substrate

N45S Cabled Angle Probe 0-25 mils Non Ferrous Substrate

$780.00
N45S Cabled Angle Probe 0-45 mils Non Ferrous Substrate

N90S Cabled Right Angle Probe 0-25 mils Non Ferrous Substrate

$780.00
N90S Cabled Right Angle Probe 0-45 mils Non Ferrous Substrate

NKS Cabled Probe 0-500 Mils Non Ferrous Substrate

$690.00
NKS Cabled Probe 0-500 Mils Non Ferrous Substrate

FNDS Cabled Probe for Duplex Coatings

$1,030.00
FNDS Cabled Probe for Duplex Coatings The FNDS Cabled Probe for Positector 6000 allows you to read the individual thicknesses

FNRS Cabled Right Angle Probe 0-60 mils All Metals

$930.00
FNRS Cabled Right Angle Probe 0-60 mils All Metals

FNTS Cabled Probe 0-250 mils All Metals

$1,005.00
FNTS Cabled Probe 0-250 mils All Metals

FNGS Cabled Probe 0-2500 mils All Metals

$1,510.00
FNGS Cabled Probe 0-2500 mils All Metals

200B Probe 0.5-40 mils for coatings on wood, plastic (Probe Only)

$1,695.00
200B Probe 0.5-40 mils wood,concrete,composite material and more

200C Probe 2.0-150 mils for coatings on concrete, fiberglass (Probe Only)

$1,895.00
200C Probe 2.0-150 mils wood, concrete, composite material and more

200D Ultrasonic Probe 2-300 mils (Probe Only)

$2,095.00
200D Probe 2-300 mils wood, concrete, composite material and more

SST Probe

$400.00
Positector SST Soluble Salt Tester The Positector SST Soluble Salt Tester can be used to measure the concentration of soluble