Showing 73–108 of 362 results

Cath-Tech CorrReader Test Point Recorder

$1,098.56

Discount due to units needing calibration.  If current calibration is needed please call 1-800-582-4243 for pricing.

Cath-Tech CTL-3000 Analogue DCVG

$3,200.00
Cath-Tech CTL-3000 Analogue DCVG The Cath-Tech CTL-3000 Analogue DCVG is used to detect holidays in coatings on buried structures to

Cath-Tech Hexcorder Pro

$12,183.60
Cath-Tech Hexcorder Pro The Cath-Tech Hexcorder Pro was designed from the ground up to make conducting surveys a streamlined and

Cath-Tech Smart Logger II Dual Input w/ GPS

$2,835.00

Discount due to units needing calibration.  If current calibration is needed please call 1-800-582-4243 for pricing.

Certified Clemtex Hypodermic Needle Pressure Gauge

$339.00

Clemtex Hypodermic Needle Pressure Gauge

Included with the purchase of this Certified Clemtex Hypodermic Needle Pressure Gauge is a 3 point calibration certificate done by KTA's service department.  If this is not needed a non-certified version can be found by Clicking Here. Maximize your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Proper use of this gauge will measure pressure drops that are responsible for decreased production rates, increased abrasive consumption and improper anchor profile in abrasive blasting systems. Accuracy: ±5% Made in the USA.

Certified Step Blocks

$425.00
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge.  These blocks have a certificate traceable to NIST.

Chlor*Rid DTS (Direct-To-Surface) Liquid Soluble Salt Remover

$134.00
Say goodbye to salt-related rework with Chlor*Rid DTS Liquid Soluble Salt Remover.
  • Pre-mixed solution with the same salt-removing capabilities as Chlor*Rid
  • Removes chlorides, nitrates, and sulfates from surfaces
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chlor*Rid Liquid Soluble Salt Remover

$384.00
Say goodbye to salt-related rework with Chlor*Rid Liquid Soluble Salt Remover.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight
   

Chlor*Rid SP8 Gel

$380.00
Say goodbye to salt-related rework with Chlor*Rid SP8 Gel.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • Prevents flash rust
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chlor*Rid SP8 Rinse

$197.50
Say goodbye to salt-related rework with Chlor*Rid SP8 Gel & Rinse.
  • Removes chlorides, nitrates, and sulfates from surfaces
  • Prevents flash rust
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chlor*Test Abrasive Kit

$95.00
Detection of chloride contamination on blast cleaning abrasive media is made easy using the Chlor*Test-A Kit. Complete with all of the necessary supplies to perform extraction and analysis on four samples.

Chlor*Test CSN Refill Kit

$240.00$2,260.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Test CSN SCAT Kit

$1,680.00
The Chlor*Test CSN SCAT Kit is used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Test Water Kit

$105.00
Detection of chloride contamination in water used for pressure washing/water jetting operations is made easy using the Chlor*Test-W Kit. Complete with all of the necessary supplies to perform analysis of five water samples.

Chlor*Test™ SCAT Kit

$120.00$1,075.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

Chlor*Wash Multipurpose Cleaner & Salt Remover

$109.75
A chemical blend that aids in the removal of road films, dirt, and chloride, sulfate, and nitrate salts.
  • Removes road films, dirt, and chloride, sulfate, and nitrate salts.
  • 5-Gallon Pail.
  • Applied using a pressure washer
*This Product Ships via Ground or Freight  

Chloride Quantab Test Strips

$74.95
The chloride Quantab test strips make testing for chlorides in a solution an easy task.  Usage is a simple as putting the strip into the test solution and waiting for the band to turn a dark color.

Clemtex Hypodermic Needle Pressure Gauge

$245.00
Clemtex hypodermic needle pressure gauge maximizes your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Made in the USA.

Coarse 0.8 to 2.5 mils (20 to 64 microns)

$38.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

Combo-Welding Gauge

$114.25
Can measure in Inch or Metric
  • Measure root size: Accurately determine the root size of your welds, crucial for maintaining structural integrity.
  • Fillet weld leg measurement: Easily assess fillet weld leg dimensions, ensuring compliance with specifications.
  • Butt weld height: Measure butt weld height with precision, vital for achieving desired weld profiles.
  • Fillet weld throat: Determine fillet weld throat dimensions accurately for optimal weld strength.
  • Angle of preparation: Gauge the angle of preparation effortlessly, facilitating precise welding setups.

Commercial Painting Inspection Kit

$2,345.00
Not sure what combination of inspection instruments you need? KTA has done the work for you with it's complete Basic Inspection Instrument Kit.

Corporate Worker Lead Protection Program

Prepared to address the requirements of the OSHA Construction Industry Lead Standard, the KTA Corporate Worker Lead Protection Program includes a Medical Surveillance Program and a Respiratory Protection Program for lead exposure projects

$500

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

Corporate Worker Safety & Health Program for Facilities Maintenance

KTA’s experience with the petrochemical and gas industries indicates that painting contractors need a corporate worker safety and health program that not only complies with 29 CFR 1926, but also selected regulations in 29 CFR 1910 (OSHA General Industry Standards).

$3,000

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

Corporate Worker Safety & Health Program for Industrial Painting Projects

Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.

$3,000

Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order

Corporate Worker Safety and Health Program for Construction Painting Projects

$3,000.00
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.

Corrosion and Coatings

$95.00
Introduces the various mechanisms and forms of corrosion, the prevention and control of corrosion through the use of coatings, and other practices for maintaining corrosion control.

Corrosion In reinforced concrete structures

$240.00
This book contains the fundamental aspects of corrosion in concrete, analyzed in detail.

Customizable Weld Inspection Kit

$56.50$667.00
Introducing our Customizable Weld Inspection Kit, tailored to meet your specific needs. With the freedom to select gauges and quantities, you determine which assortment is best for you.

Dakota V-Block Housing

$150.00
The Dakota V-Block Housing is made to make reading wall thickness on curved surfaces easier. This is accomplished by the

Dakota ZX-3

$1,525.00
The Dakota ZX-3 is the replacement for the popular MX-3. Supplied by default is a 5 mHz transducer which allows it to read around 6” of wall thickness.

Dakota ZX-5

$1,600.00$1,800.00
The Dakota ZX-5 is the replacement for the MX-5. The ZX-5 features settings like an alarm mode that can be configured to alert the user when out of range.

Dakota ZX-6

$1,775.00$1,975.00
The Dakota ZX-6 is the replacement for the popular MX-6. The ZX-6 features a multi echo mode that can read the wall thickness through coatings.

DE Stearns 14/20 High Voltage Holiday Detector

$4,195.00
Detect pinholes in coatings and linings greater than 20 mils thick. Variable voltage up to 35,000 volts. Select from various electrodes. Please call for pricing and availability on Spring and Flat Brush Electrodes.

DE Stearns 14/20 High Voltage Holiday/Pinhole Detector

$4,195.00
Verify a pinhole-free coating using the DE Stearns high voltage holiday detector.

DeFelsko Certified Coating Thickness Standards

$375.00
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS S1 0, 3, 10, 60 mils S2 0, 3, 10, 40 mils

DeFelsko Plastic Shims

$15.00$225.00
These convenient, pre-packaged, color-coded plastic shim sets are used to verify the accuracy of electronic dry film thickness gauges.