Cath-Tech CTL-3000 Analogue DCVG
Cath-Tech Hexcorder Pro
Certified Clemtex Hypodermic Needle Pressure Gauge
Clemtex Hypodermic Needle Pressure Gauge
Included with the purchase of this Certified Clemtex Hypodermic Needle Pressure Gauge is a 3 point calibration certificate done by KTA's service department. If this is not needed a non-certified version can be found by Clicking Here. Maximize your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Proper use of this gauge will measure pressure drops that are responsible for decreased production rates, increased abrasive consumption and improper anchor profile in abrasive blasting systems. Accuracy: ±5% Made in the USA.Certified Step Blocks
Chlor*Rid DTS (Direct-To-Surface) Liquid Soluble Salt Remover
Say goodbye to salt-related rework with Chlor*Rid DTS Liquid Soluble Salt Remover.
- Pre-mixed solution with the same salt-removing capabilities as Chlor*Rid
- Removes chlorides, nitrates, and sulfates from surfaces
- 5-Gallon Pail.
- Applied using a pressure washer
Chlor*Rid Liquid Soluble Salt Remover
Chlor*Rid SP8 Gel
Chlor*Rid SP8 Rinse
Chlor*Test Abrasive Kit
Chlor*Test CSN Refill Kit
Chlor*Test CSN SCAT Kit
Chlor*Test Water Kit
Chlor*Testâ„¢ SCAT Kit
Chlor*Wash Multipurpose Cleaner & Salt Remover
Chloride Quantab Test Strips
Clemtex Hypodermic Needle Pressure Gauge
Clemtex hypodermic needle pressure gauge maximizes your abrasive blast cleaning productivity with this pocket-sized pressure gauge. Adapted for use with hypodermic needles, this gauge was designed specifically to measure the abrasive blast cleaning air pressure (up to 160 psig) at the blast nozzle, where it really counts. Made in the USA.
Coarse 0.8 to 2.5 mils (20 to 64 microns)
Combo-Welding Gauge
Can measure in Inch or Metric
- Measure root size: Accurately determine the root size of your welds, crucial for maintaining structural integrity.
- Fillet weld leg measurement: Easily assess fillet weld leg dimensions, ensuring compliance with specifications.
- Butt weld height: Measure butt weld height with precision, vital for achieving desired weld profiles.
- Fillet weld throat: Determine fillet weld throat dimensions accurately for optimal weld strength.
- Angle of preparation: Gauge the angle of preparation effortlessly, facilitating precise welding setups.
Corporate Worker Lead Protection Program
Prepared to address the requirements of the OSHA Construction Industry Lead Standard, the KTA Corporate Worker Lead Protection Program includes a Medical Surveillance Program and a Respiratory Protection Program for lead exposure projects
$500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderCorporate Worker Safety & Health Program for Facilities Maintenance
KTA’s experience with the petrochemical and gas industries indicates that painting contractors need a corporate worker safety and health program that not only complies with 29 CFR 1926, but also selected regulations in 29 CFR 1910 (OSHA General Industry Standards).
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to OrderCorporate Worker Safety & Health Program for Industrial Painting Projects
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.