Showing 253–288 of 362 results

Spy Low Voltage Wet Sponge Holiday-Pinhole Detector

$440.00
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.

SSPC Pocket Guide to Coating Information

$20.00
This handy pocket guide is packed with information and formulas commonly referenced during coatings work, including information on corrosion, surface preparation, soluble salt detection, coating application, International Marine Regulations, concrete standards and inspection. This Guide is a "must have" for anyone involved with industrial coatings.

SSPC Surface Preparation Specifications and Practices

$180.00
Surface preparation standards for solvent cleaning, hand and power tool cleaning, abrasive blast cleaning, water jetting and preparation of concrete for coatings are all provided in this single source, soft bound publication produced by SSPC: The Society for Protective Coatings.

SSPC Vis Guides

$195.00
Using the SSPC visual guide can reduce the degree of subjectivity associated with evaluating surface cleanliness. There are a total

Stainless Steel Burnishing Tool

$10.00
Stainless Steel Burnishing Tool is perfect for use with Testex replica tape. This burnishing tool is designed to be much more durable than its plastic counterparts.  With its stainless steel construction, you no longer have to worry about breaking your burnishing too while on the job!

Steel Test Panels

$99.50
Hot Rolled Steel Panels | 10 pack SP-10 Blast 2-3mil profile
  • 3" x 6" x 1/8"
  • 3" X 6" x 1/4"
  • 4" x 6" x 1/8"
  • 4" x 6" x 1/4"

Surface Coatings for protection against wear

$270.00
This book covers coating characterization and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings and discusses the various methods used to deposit wear resistance coatings.

Testex Optical Replica Tape – For use with RTR3D

$50.00
Testex optical replica tape is used in conjunction with a Defelsko RTR 3D Probe to measure surface profile according to Method C in ASTM D4417.

Testex X-Coarse Plus 4.6 to 5 mils (116 to 127 microns)

$50.00
Testex X-Coarse Plus 4.6 to 5 Mil replica tape is used with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

The Concrete Profiler

$127.00
Permanently replicate the roughness of concrete surfaces prior to coating using The Concrete Profiler or TCP.

The Paint Inspectors Field Guide

$195.00
For protective coating inspection. An Inspection aid and guide produced for the inspector, by an inspector. This field guide was developed to offer guidance, experience and assistance to protective coating inspectors, specifiers, owners, and painting contractors. The book is complemented by a wide range of inspection and experience notes, with additional photos of coatings issues.

Tinker-Rasor Water Wetter

$14.50
Water wetter to help improve the viscosity of water for low voltage wet sponge holiday detecting.

Tooke Gauge

$75.00$1,380.00
Measure the thickness of individual coating layers (must be alternating or different colored layers) after the fact using the Tooke Gauge. This powerful gauge is hand-held and portable, and can be used over nearly any type of substrate.

TQC Concrete Moisture Meter

$595.00
Non-destructive digital moisture meter for concrete.

TQC Dust Tape Kit

$175.00
The TQC dust tape kit has everything needed to perform tests in accordance with ISO 8502-3 and JIS Z 0313 to verify that there is no dust on the surface.

Turbo Fuse Adhesive

$22.00
Glue your adhesion testing dollies using our Turbo Fuse instant bonding adhesive.

Ultrasonic Couplant

$21.00
Ultrasonic couplant is used to couple ultrasonic gauges to the surface they are reading on.  The gel like consistency of

US Weather Bureau Psychrometric Tables (WB-235)

$6.50
The US Weather Bureau Psychrometric Tables are used for determining the relative humidity and dew point temperature from the dry and wet bulb temperature readings on sling or battery-powered psychrometers. The tables cover the range of 23.0 to 30.0 inches barometric pressure.

Using Coatings Inspection Instruments 3rd Edition

$75.00
Completely updated, the 3rd edition includes instructions on the step-by-step use of 50 instruments and test kits for measuring ambient conditions (including electronic psychrometers), surface profile (including two digital depth micrometers and a new procedure for use of replica tape), SSPC visual guides, wet and dry film thickness, concrete testing, destructive coating thickness measurement, adhesion, holiday/pinhole detection and coating hardness. An updated list of surface cleanliness standards, an updated index of industry standards, and a new surface salt extraction and analysis procedure are also included.

Vaprecision Calcium Chloride Vapor Emission Test Kit

$39.00
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.

Viscosity Cups

$154.00$160.00
Measure the viscosity of coatings prior to application quickly and easily in the field using viscosity cups.

Wagner Rapid RH L6

$212.00$1,785.00
The Wagner Rapid RH L6 makes performing ASTM F2170 an easy task.  To use the Rapid RH L6 a Smart

Wall Mount Hygrometer/Thermometer

$175.00
This maintenance-free wall mount hygrometer equipped with a dual readout displays the temperature (0-160°F; -19.9-69.8°C) digitally and the humidity (20-100%) on an analog dial for simultaneous monitoring, in either °F or °C (switchable).

Wolf Wilburn Pencil Hardness Tester

$507.00
The Wolf Wilburn Pencil Hardness Tester is a scratch type hardness tester.  It utilizes a weighted cart to apply even

X-Coarse 1.5 to 4.5 mils (38 to 115 microns)

$38.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.

Ames Dial Micrometer

$190.00$194.00
Measure the thickness of disbonded paint chip samples or verify the thickness of plastic shims using this small, portable, precision, spring-loaded dial micrometer manufactured by Ames.

Barcol Impressor Hardness Tester

$1,416.00
Measure the hardness of aluminum, aluminum alloys, copper, brass, fiberglass, plastics and other materials in the laboratory, shop or field according to ASTM D2583 using the Barcol Impressor Hardness Tester.

Byko Test

$595.00
The Byko Test is a compact and affordable dry film thickness gauge capable of reading 0-79 mils on both ferrous

Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)

$119.95
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will

Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)

$119.95
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."

Kestrel 1000 Pocket Wind Meter

$111.00
Kestrel 1000 Pocket Wind Meter Overview Here’s the one that started it all! Measuring wind is a breeze with the

Kestrel 2500 Pocket Weather Meter

$199.00
Kestrel 2500 Pocket Weather Meter Overview The Kestrel 2500 takes the great features of the Kestrel 2000 and adds in

Kestrel 3000 Pocket Weather Meter

$199.00
Kestrel 3000 Pocket Weather Meter The Kestrel 3000 Pocket Weather Meter is the handheld weather-monitoring device that provides a wide

Kestrel 5000 Environmental Meter

$285.00
Kestrel 5000 Environmental Meter Overview Used in firefighting, agriculture, hazardous materials response, meteorology, military, law enforcement, research, education, scientific &

Kestrel 5000 Environmental Meter with LiNK

$325.00
Kestrel 5000 Environmental Meter with LiNK The next generation of environmental conditions monitoring is the here with the Kestrel 5000

Kestrel 5500 Rugged Weather Meter

$305.00
Kestrel 5500 Rugged Weather Meter Quick Look: Measures wind speed, temperature, humidity, pressure and direction. 14 total meteorological parameters measured,