Chlor*Rid™ Products

Chlor*Rid™ is the world-leading soluble salt remover.

Soluble salts, such as chlorides, sulfates, and nitrates, are found on surfaces everywhere. These soluble salts draw moisture through protective coatings, causing them to blister and fail. They can also cause degradation of the substrate. Lost productivity from protective coating failures is costly and can be hazardous.

Chlor*Rid™ products have long been recognized for their unparalleled effectiveness in removing soluble salts, a critical step in ensuring the long-term durability and performance of coatings and substrates.

KTA offers nationwide shipping* or in-store pickup in Pittsburgh, PA. Order Online or call us at 1-800-582-4243.

*Chlor*Rid™, Chlor*Wash™, and Hold*Blast™ products are not available for free 2-day shipping. Freight quote required.

CHLOR*RID™

Liquid Soluble Salt Remover

5-gallon Pail

The easiest, safest and most economical method available for removing soluble salts

More information

  • Compatible with all coatings
  • Apply through UHP pressure equipment
  • Dilute with potable water
  • Economical: Pennies per square foot
  • No rinse required
  • No Residue
  • Vapor/Mist blasting
  • Bio-degradable
  • Non-hazardous
  • No VOC’s

CHLOR*RID® will not interfere with the adhesion of protective coatings & linings.

Learn more by calling KTA’s sales team at 1-800-582-4243

CHLOR*RID DTS™

Direct-to-Surface

5-gallon Pail

A pre-mixed solution with the same soluble salt-removing capabilities as CHLOR*RID

More information

  • No field mixing or diluting
  • No special application equipment needed
  • No high cost
  • No harsh chemicals, no health hazards, no certifications
  • No residue left behind
  • Apply by brush, roller, or spray application, then rinse off
  • Unparalleled, proven results around the world

CHLOR*RID® will not interfere with the adhesion of protective coatings & linings.

Learn more by calling KTA’s sales team at 1-800-582-4243

CHLOR*WASH™

Multi-Purpose Cleaner & Salt Remover

5-gallon Pail

A chemical blend which aids in the removal of road films, dirt, and chloride, sulfate, and nitrate salts.

More information

• Specially formulated to wash all surfaces of salt and dirt.
• Maximum performance yet is safe to the environment.
• For use in pressure washers and hand washing applications.
• Performance chemical blend designed to remove road film, dirt, de-icing salts, marine salts and acid rain residue.
• Easy to use
• Low Cost
• Biodegradable
• Concentrated
• Non-hazardous
• No residue
• No VOCs
• Non-flammable

Recommended for use anywhere that dirt and salts need to be removed as a maintenance wash.
• Bridges
• Trucks & Trailers
• Salt Spreaders
• Buildings
• Snow Removal Equipment
• Concrete & Masonry
• Boats
• Piping
• RVs

Learn more by calling KTA’s sales team at 1-800-582-4243

HOLD*BLAST™

Surface Passivator

5-gallon Pail

An easy-to-use, economical product that stops flash rust from occurring.

More information

  • Compatible with all coatings
  • Cost Effective
    HOLD*BLAST costs only pennies per square foot.

  • Dilute with potable water
    No need for high cost deionized or high purity water.

  • Vapor/Mist blasting
    Use a 1:50 dilution, depending on the quality of water, a higher dilution may be possible.

  • Apply through UHP pressure equipment
  • No VOCs
  • Non-hazardous
  • Bio-degradable

HOLD*BLAST™ does not leave a film or residue to interfere with a coating.

Learn more by calling KTA’s sales team at 1-800-582-4243

CHLOR*RID™ SP8 GEL

Soluble Salt & Flash Rust Remover

5-gallon Pail

A non-toxic soluble salt and flash rust remover, field-applied pickling agent.

More information

Click for Flyer

Click for PDS

Click for SDS

  • Easy to use
  • Improve coating adhesion up to 66%
  • Eliminate weather delays
  • Reduce carbon footprint
  • Biodegradable & easy to ship
  • Reduce project costs by up to 40%
  • Save time on unnecessary rework
  • Extend coating service life

CHLOR*RID™ SP8 Gel is for use after initial blasting to remove flash rust and will not remove coatings, scale rust, or milscale.

Learn more by calling KTA’s sales team at 1-800-582-4243

CHLOR*RID™ SP8 RINSE

Soluble Salt & Flash Rust Remover

5-gallon Pail

A non-toxic soluble salt remover and fully evaporative surface passivator.

More information

Click for Flyer

Click for PDS

Click for SDS

  • Not an inhibitor
  • Does not leave a film
  • Improves adhesion
  • Significantly prevents flash rust
  • Non-flammable
  • Water-based
  • Fast-drying
  • Completely evaporates
  • Non-toxic
  • Eco-friendly and biodegradable

Learn more by calling KTA’s sales team at 1-800-582-4243

Test Kits

Test kits are available for purchase on our online store.

CHLOR*TEST™ SCAT KIT

Chloride Ion Test for Surfaces

Used to extract surface samples and analyze the samples for chlorides and other soluble salts.

CHLOR*TEST “A”™

Chloride Ion Test for Abrasives

Detection of chloride contamination on blast cleaning abrasive media is made easy using this kit.

CHLOR*TEST “W”™

Chloride Ion Test for Water

Used for detection of chloride contamination in water used for pressure washing/water jetting operations.

CHLOR*TEST “CSN”™

CSN Contamination Test

All of the supplies required to test surfaces for Chloride, Sulfate, and Nitrate contamination.

Shopping cart
Sidebar