Cathodic Protection

We carry a wide range of Cathodic Protection Equipment for inspecting buried pipe, holidays, and coating defects for corrosion control.

  • Hot
    Cath-Tech CI-100 Current Interrupter w/ GPS

    Cath-Tech CI-100 Current Interrupter w/ GPS

    0 out of 5

    Features

    Portable current interrupter

    GPS continuously synchronized

    Microprocessor driven

    Flash memory

    5 programmable time schedules

    Interruption cycle

    Start and stop times

    Start and stop dates

    Holds power ON when not interrupting

    Colour coded SupreCon® output terminals

    Storage compartment for cables and accessories

    Comprehensive 1 year warranty

    Technical Specification

    Capacity DC: Up to 100A, up to 250VDC

    Capacity AC: Up to 100A, up to 600VAC

    • Switching: Mechanical relay

    Case: IP67 / NEMA 4X plastic case with o-ring seal and locking hasp

    Dimensions: 40.5cm x 33cm x 18cm (16” x 13” x 7”)

    Weight: 9.5 kg (21 lb)

    Battery: 12V 5.5 amp hour sealed lead acid

    User Interface: 20×4 LCD display, sunlight readable, and 16 key pad

    Com Port: RS-232 communication port, 9 pin male

    External Power: Accepts 12V DC external power to supplement battery life

    GPS synchronized, with magnet mount antenna for easy placement with view of the sky

    Cycle time 1/4 sec to 6 min

    Off time: 0 to 9999mSec (synchronized to the beginning of the minute, 0 seconds)

    Non GPS synchronized operation also possible

    Included

    CI-100 Current Interrupter

    AC charger; 120/240V AC, 50/60 Hz input

    DC interruption cables with copper alligator clips and rubber boots

    • Magnet mount GPS antenna

    • Owners manual

    Specifications subject to change without notice, see owners manual for further information

    $2,520.00
  • Cath-Tech CI-50 Current Interrupter w/ GPS

    Cath-Tech CI-50 Current Interrupter w/ GPS

    0 out of 5

     * Portable current interrupter 

    * GPS continuously synchronized

    · Microprocessor driven

    · Flash memory

    · 5 programmable time schedules

      Interruption cycle

      Start and stop times

      Start and stop dates

    · Holds power ON when not interrupting

    · Colour coded SuperCon® output

    terminals

    · Storage compartment for cables and

    accessories

    · Comprehensive 1 year warranty

    Technical Specification

    · Capacity DC: Up to 50A at 100VDC

    · Switching: Electronic relay

    · Case: IP67 / NEMA 4X plastic case with o-ring seal and locking hasp

    · Dimensions: 27cm x 25cm x 20cm (11” x 10” x 8”)

    · Weight: 5 kg (11 lb)

    · Battery: 7.2V 2 amp hour NiMH

    · User Interface: 20×4 LCD display, sunlight readable, and 16 key pad

    · Com Port: RS-232 communication port, 9 pin male

    · External Power: Accepts 12V DC external power to supplement battery life

    · GPS synchronized, with magnet mount antenna for easy placement with view of the sky

      Cycle time 1/4 sec to 6 min

      Off time: 0 to 9999mSec (synchronized to the beginning of the minute, 0 seconds)

    · Non GPS synchronized operation also possible

    Included

    · CI-50 Current Interrupter

    · AC charger; 120/240V AC, 50/60 Hz input

    · DC interruption cables with copper alligator clips and rubber boots

    · Magnet mount GPS antenna

    $2,195.00
  • Hot
    Cath-Tech CorrReader Test Point Recorder

    Cath-Tech CorrReader Test Point Recorder

    0 out of 5

    Record critical CP data such as pipe-soil potentials, AC, date, time and GPS location for many points such as; Test stations, Meters, Risers, Valves, Bonds, Tanks, etc.

    Technical Specification

    · Single channel, DC and AC:

      DC range of +/-10V at 0.1 mV precision with 1% accuracy

      AC range of 100V at 1 mV precision with 1% accuracy

    · Input impedance 10 MΩ

    · AC rejection at 50 Hz to 60 Hz 80db, 50 V RMS superimposed

    · Heavy duty impact resistant IP65 NEMA 4 case

    · Operator programmable interruption cycle and ON/OFF durations.

    · 16×4 LCD sunlight readable high contrast display

    · Membrane switch tactile keypad with 6 buttons

    · Long life 3.6V Li Ion battery recharged via USB

    · Fully integrated internal GPS

    · Micro SD card memory & data storage

    · Waterproof USB 2.0 interface for data transfer

    · Dimensions: 12.5cm x 5cm x 19cm, 5” x 2” x 7.5”

    · Weight: 525 g, 1.2 lbs

    Features

    · Designed for simple easy use, even by non-corrosion technicians

    · Internal GPS for synchronization and location information

    · Optional entry of operator comments, location ID, etc

    · Data saved to SD card with GPS coordinates and date/time stamped, no more hand written notes

    · Programmable GPS time offset to operate in local time

    · Data stored in an ASCII comma delimited file, no special software required!

    · Ergonomic hand held design with no-slip grips

    · Waterproof 5 way binding posts for test leads

    · Comprehensive 2 year warranty

    $1,395.00
  • Hot
    Cath-Tech CTL-3000 Analogue DCVG

    Cath-Tech CTL-3000 Analogue DCVG

    0 out of 5

    Features

    Accurately locate coating defects

    Estimate defect size

    Indentify priority for excavation

    Monitor coating condition

    Confirm electrical continuity

    Single surveyor required

    •Auto-zero function to remove bias from readings

    Comprehensive 1 year warranty

    Technical Specification

    Meter: Centre zero analogue

    Input Impedance: 10, 100, 1000 Mohm

    Measurement: Scales to 10, 20, 50, 100, 200, 500, 1000, 2000, 5000 mV

    Case: Die cast aluminum, grey baked enamel

    Dimensions: 19cm x 10cm x 13cm (7.5” x 4” x 5”)

    Weight: 1.4 kg (3 lb)

    Battery: 12V 2.0 amp hour NiMH

    Half cell poles: Fiberglass, adjustable length

    Half cells: Cu/CuSO4

    Carrying Case: Plastic, IP67 rated 40.5cm x 33cm x 18cm (16” x 7” x 13”)

    Included

    CTL-3000

    2 half cell poles with cables

    2 Cu/CuSO4 half cells

    AC charger; 120/240 V AC, 50/60 Hz input

    Carrying case

    Neck strap

    Owners manual

    $3,200.00
  • Hot
    Cath-Tech Hexcorder MM CIPS/DCVG Surveys

    Cath-Tech Hexcorder MM CIPS/DCVG Surveys

    0 out of 5
    $10,500.00
  • Hot
    Cath-Tech Smart Logger II Dual Input w/ GPS

    Cath-Tech Smart Logger II Dual Input w/ GPS

    0 out of 5
    $3,600.00
  • Fluke 117 MultimeterFluke 117 Multimeter

    Fluke 117 Multimeter

    0 out of 5
    $220.00
  • Fluke a3000 FC Clamp MeterFluke a3000 FC Clamp Meter

    Fluke a3000 FC Clamp Meter

    0 out of 5
    $235.00
  • Tinker & Rasor AC-15 AC Warning SystemTinker & Rasor AC-15 AC Warning System

    Tinker & Rasor AC-15 AC Warning System

    0 out of 5
    $595.00
  • Tinker & Rasor Copper-Copper/Sulfate (CSE) Half Cell Reference Electrodes

    Tinker & Rasor Copper-Copper/Sulfate (CSE) Half Cell Reference Electrodes

    0 out of 5
    $55.00$80.00
  • Tinker & Rasor RF-IT Above Ground Insulator TesterTinker & Rasor RF-IT Above Ground Insulator Tester

    Tinker & Rasor RF-IT Above Ground Insulator Tester

    0 out of 5
    $525.00
  • Tinker & Rasor Silver-Silver/Chloride (AgAg/Cl) Reference Electrode KitTinker & Rasor Silver-Silver/Chloride (AgAg/Cl) Reference Electrode Kit

    Tinker & Rasor Silver-Silver/Chloride (AgAg/Cl) Reference Electrode Kit

    0 out of 5
    $265.00