Surface Contamination Test Kits

  • ARP Soluble Salt Meter

    ARP Soluble Salt Meter (SSM) Buy Lite KIT

    0 out of 5

    The SSM was developed specifically to improve current methods of establishing surface cleanliness. This meter is the approved alternative for use as a replacement to the Bresle patch method equivalent to ISO Standard 8502-09.

    $650.00$1,995.00
  • Chlor Rid eCHLOR*TEST Chloride Test ChlorimeterChlor Rid eCHLOR*TEST Chloride Test Colorimeter

    Chlor Rid eCHLOR*TEST Chloride Test Chlorimeter

    0 out of 5
    $110.00$1,599.00
  • Chlor Test Abrasive Kit

    Chlor*Test Abrasive Kit

    0 out of 5

    Detection of chloride contamination on blast cleaning abrasive media is made easy using the Chlor*Test-A Kit. Complete with all of the necessary supplies to perform extraction and analysis on four samples.

    $73.00
  • ChlorTest Water Kit

    ChlorTest Water Kit

    0 out of 5

    Detection of chloride contamination in water used for pressure washing/water jetting operations is made easy using the Chlor*Test-W Kit. Complete with all of the necessary supplies to perform analysis of five water samples.

    $77.00
  • Horiba LAQUAtwin B-771

    Horiba LAQUAtwin B-771

    0 out of 5

    Measure the conductivity (0-19.9 mS/cm) of surface sample extractions or extractions from abrasive cleanliness tests using the Horiba digital conductivity meter.

    $325.00
  • Insta-Chek Surface pH Pencil

    Insta-Chek Surface pH Pencil

    0 out of 5

    Convenient pencils measure the pH of a surface in the range of pH 0-13. Sold in packs of 3.

    $40.00
  • KTA Abrasive Blasting Conductivity Kit

    KTA Abrasive Blasting Conductivity Kit

    0 out of 5

    The abrasive blasting conductivity kit comes with step by step instructions that provide guidance on the performance of conductivity testing of blast cleaning abrasives in general accordance with ASTM D4940, Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives.

    SSPC AB1 (Mineral & Slag Abrasives)
    SSPC AB2 (Cleanliness of Recycled Ferrous Metallic Abrasives)
    SSPC AB 3 (Ferrous Metallic Abrasives)

    Kit Includes:
    EC/TDS/Temp Meter, Low Range (Hanna HI98311)
    600 ml Glass Beaker (for mixing the abrasive/water)
    100 ml Glass Beaker (for 445 solution, conductivity-blank & filtered slurry water)
    600 ml Plastic Beaker (2) (used to collect abrasive)
    1000 ml Plastic Bottle (used to rinse meter, glassware, etc.)
    2oz / 65mm wide funnel
    8 inch glass stirring rod (2)
    ASTM E832 Type 1 Class C 11 cm filters (20)
    4 oz (125ml) bottle of standard test solution (445 uS/cm)
    Disposable Gloves – X Large (5 pair)
    Paper Towels
    Conductivity of Abrasive Procedures
    SSPC Standards AB 1/2/3 & ASTM D4940-10
    Pelican 1520 Hard Case

    $425.00
  • KTA Bresle SCAT Chloride Ion

    KTA Bresle SCAT for Chloride Ion (Kitagawa Method)

    0 out of 5

    BRAND NEW OFFERING!

    Conforms to ISO 8502-5 (Measurement of chloride on steel surfaces prepared for painting, ion detection tube method) and ISO 8502-6 (Extraction of soluble contaminants for analysis — The Bresle method)

    This total kit will allow for 50 complete tests!

     


    The kit contains:

    (2 boxes) Bresle Patch boxes/25 each

    (5 boxes) Kitagawa Tubes/10 each

    (1 bottle) Hach Demineralizer

    (2 each) 5ml Syringes

    (1 each) COMPLETE step by step usage instructions

    (1 each) Pelican 1400 Lifetime warranty protective carrying case

    $850.00
  • KTA Bresle SCAT Kit 1

    KTA Bresle SCAT Kit 1

    0 out of 5

    KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

    $5.00$615.00
  • KTA Bresle SCAT Kit 2

    KTA Bresle SCAT Kit 2

    0 out of 5

    KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

    $5.00$750.00
  • KTA Chlor Test CSN SCAT Kit

    KTA-Chlor*Test™ CSN SCAT Kit

    0 out of 5

    KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

    $75.00$1,059.00
  • Hot
    KTA Chlor Test SCAT Kit

    KTA-Chlor*Test™ SCAT Kit

    0 out of 5

    KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.

    $97.00