Chlor*Test™ SCAT Kit
Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts. All of the SCAT Kits conform to SSPC Guide 15, and contain all of the equipment required to perform testing in the field. The Chlor*Test SCAT Kit includes five self-adhesive latex sleeves, five pre-measured vials of extraction liquid, five Kitagawa (chloride ion detection) tubes, a tube-end snapper, an aspirator bulb and easy-to-follow instructions. All equipment is contained in a handy box equipped with a cut-out to hold the latex sleeve during sample analysis.
Hot
Chlor*Test™ SCAT Kit
$100.00 – $895.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
Description
Additional information
| Weight | 0.5500 lbs |
|---|
You may also like…
Related products
Testex Press-O-Film Replica Tape
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
