KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts. All of the KTA SCAT Kits conform to SSPC Guide 15, and contain all of the equipment required to perform testing in the field. The KTA-Chlor*Test CSN SCAT Kit is the most comprehensive of all of the KTA SCAT Kits and includes all of the supplies required to test surfaces for Chloride, Sulfate and Nitrate contamination. The kit comes complete with five test kits, a sulfate detection meter and easy to follow instructions. Replacement kits also available. All equipment is contained in a handy plastic carrying case.
Back to products
Next product
KTA-Chlor*Test CSN SCAT Kit
$200.00 – $1,400.00
KTA-Chlor*Test CSN SCAT Kit
$1,400.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
In stock
Related products
KTA 2mm Cross Cut Guide
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Replacement Flat Sponge
Replacement flat sponge for the Spy 670.
KTA Cross-cut Guide CCG-2MM KIT
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
All goods are in stock!!
Corporate Worker Safety and Health Program for Construction Painting Projects
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
Volume I, “Good Painting Practice”
SSPC Painting Manual Volume I, "Good Painting Practice" provides a detailed overview of the procedures, equipment and materials used for surface preparation and coating work on industrial steel and concrete structures.
Coarse Blade PA2056 2mm spacing – 6 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will
Spy 670 Low Voltage Pinhole Detector
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
