- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Surface Chloride ION Test Kit – 50 Pack
$1,075.00
CHLOR*TEST Surface Chloride ION Test Kit (SCAT Kit)—50 PACK are used to extract surface samples and analyze them for chlorides and other soluble salts.
In stock (can be backordered)
SKU:
162006
Categories: Best Sellers, Surface Contamination Test Kits
Description
CHLOR*TEST Surface Chloride ION Test Kit (SCAT Kit) – 5o Bulk PACK
This Surface Chloride ION Test Kit is used to extract surface samples and analyze the samples for chlorides and other soluble salts. All of the SCAT Kits conform to SSPC Guide 15, and contain all of the equipment required to perform testing in the field. The Chlor*Test SCAT Kit includes 50 self-adhesive latex sleeves, 50 pre-measured vials of extraction liquid, 50 Kitagawa (chloride ion detection) tubes, a tube-end snapper, an aspirator bulb and easy-to-follow instructions. All equipment is contained in a bulk pack box.
Additional information
Weight | 1 lbs |
---|
You may also like…
Chlor*Test CSN Refill Kit
$240.00 – $2,260.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
Select optionsEarn up to 113 points.
This product has multiple variants. The options may be chosen on the product page
KTA Bresle SCAT Kit 1
$5.00 – $615.00
KTA-Chlor*Test CSN SCAT Kit
$240.00 – $1,680.00
pH Colorfast Strips
$33.30
Related products
Tinker-Rasor Low Voltage Wet Sponge Holiday-Pinhole Detector
$5.00 – $465.00
SST Probe and Accessories
$40.00 – $855.00
Testex Press-O-Film Replica Tape – Legacy Roll
$42.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Atkins 35200-K and Probes
$65.00 – $490.40
Chlor*Test Water Kit
$105.00
KTA Swab SCAT Kit
$300.00
PTC Durometers
$750.00 – $999.95
Measure the indention/penetration hardness of plastics, rubber and thick film coatings in the laboratory, shop or field according to ASTM D2240 using the PTC Durometer Hardness Tester.
Select optionsEarn up to 50 points.
This product has multiple variants. The options may be chosen on the product page