- Ideal for measuring the tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives
- Conforms to BS EN 12004-2
- Includes 50 mm x 50 mm steel dollies (4), and 50 mm x 50 mm stand-off
PosiTest AT 50 mm x 50 mm Tile Conversion Kit
$450.00
Description
Additional information
| Weight | 5 lbs |
|---|
Related products
Spy 670 Low Voltage Pinhole Detector
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
Medium Blade PA2054 1.5mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Vaprecision Calcium Chloride Vapor Emission Test Kit
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
Replacement Flat Sponge
Replacement flat sponge for the Spy 670.
Cross Cut Knife
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Surface Coatings for protection against wear
This book covers coating characterization and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings and discusses the various methods used to deposit wear resistance coatings.
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Roller Sponge (3 units) w/ Wand
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
