Replacement ferrous ion test strips.
Previous product
Back to products
KTA-Chlor*Test CSN SCAT Kit
$200.00 – $1,400.00
Replacement EM Quant Ferrous Ion Indicator Strips
$95.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
In stock
Related products
Cross Cut Knife
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
KTA Cross-cut Guide CCG-2MM KIT
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
All goods are in stock!!
Positest Air Leak Tester Solution
A replacement case of 16 bottles of the PosiTest Air Leak Tester solution.
Rilem Putty
The Rilem Putty is used to attach the Rilem Tube to vertical surfaces.
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will
KTA 2mm Cross Cut Guide
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
M1 (Battery Operated) 67.5v
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.
