QP-6 Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures Quality Control Manual
KTA has developed a Quality Control Manual for metallizing, written by an SSPC Certified Protective Coating Specialist with over 35 years of experience in the coatings industry, that meets the requirements of the most recent version of the QP-6 certification standard.
Contact Lisa Bowermister (lbowermeister@kta.com/412-746-4247) to Order
QP-6 Quality Control Manual
The Society for Protective Coatings Painting Contractor Certification Program Qualification Procedure No. 6 (QP-6), “Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures” requires that contractors have a written quality control manual. KTA has developed a Quality Control Manual for metallizing, written by an SSPC Certified Protective Coating Specialist with over 35 years of experience in the coatings industry, that meets the requirements of the most recent version of the QP-6 certification standard. The manual assists Contractors in demonstrating that they have adequate management procedures in place, and the technical capability to properly conduct metallizing work. Contractors must also be able to demonstrate successful implementation of a program to control the quality of thermal spray work. To assist in this effort, the KTA Quality Control Program contains appendices that provide general quality control inspection procedures, as well as instruction on the proper calibration, accuracy verification and use of coating inspection instrumentation and visual guides.
Get the QP6 Addendum for $500 when adding it to your existing QP1 or QP3 Quality Control Program. Or get the complete package including either QP1 or QP3 with the QP6 Addendum for $2,000.
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
| Weight | 1 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Corporate Worker Lead Protection Program
Prepared to address the requirements of the OSHA Construction Industry Lead Standard, the KTA Corporate Worker Lead Protection Program includes a Medical Surveillance Program and a Respiratory Protection Program for lead exposure projects
$500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
Corporate Worker Safety & Health Program for Facilities Maintenance
KTA’s experience with the petrochemical and gas industries indicates that painting contractors need a corporate worker safety and health program that not only complies with 29 CFR 1926, but also selected regulations in 29 CFR 1910 (OSHA General Industry Standards).
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
Corporate Worker Safety & Health Program for Industrial Painting Projects
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
QP-1 Coatings Quality Control Program
Prepared specifically for industrial painting contractors, this written quality control program has been completely updated to conform to the management, technical and quality control requirements of the AMPP-QP1 Contractor Certification Program.
$1,500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
QP-2 Deleading Compliance Program
Prepared under the direction of a Certified Industrial Hygienist, the KTA Corporate Deleading Compliance Program addresses the protection of workers, management of releases of lead to air, soils and waters, and management of waste streams. The program provides policies and guidance in each of these three general areas, and is based upon existing Federal regulations.
$1,500
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
QP-3 Quality Control Program
Developed by an SSPC certified Protective Coatings Specialist, this Quality Control Program addresses the latest requirements of SSPC: The Society for Protective Coatings QP-3 certification program.
$2,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
QP-3 Worker Safety and Health Program
This Corporate Worker Safety and Health Program conforms to the criteria of SSPC: The Society for Protective Coatings Qualification Procedure No. 3 (QP 3) Standard Procedure for Evaluating Qualifications of Shop Painting Applicators. The program is designed to be used in conjunction with a current copy of 29 CFR 1910 (not included).
$3,000
Contact Lisa Bowermister (lbowermeister@kta.com / 412-746-4247) to Order
QS 1, Standard Procedure for Evaluating a Contractor’s Advanced Quality Management System
$2,000
Contact Lisa Bowermister (lbowermeister@kta.com /412-746-4247) to Order
Reviews
There are no reviews yet.