Keane-Tator Surface Profile Shot Comparator Disc 372/SH
$115.00
Assess surface profile depth (generated by abrasive blast cleaning) quickly and easily with these durable 3" reference discs.
Ships on December 15, 2025
In stock (can be backordered)
Description
Keane-Tator Surface Profile Shot Comparator Disc 372/SH
Optimize your inspections with the Keane-Tator Surface Profile Sand Comparator Disc Sand Disc 372/SH, ideal for accurate and efficient comparisons. Used with the Keane-Tator Surface Profile Comparator.
Instruction Manuals
Shot Comparator Disc 372/SH
Additional information
| Weight | 0.1000 lbs |
|---|
Related products
Testex Press-O-Film Replica Tape - Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
