A 1/8″ diameter needle K-type temperature probe. Capable of reading -40° to 500 °F.
Previous product
Back to products
Atkins 50318-K
$112.00
Next product
Atkins 35200-K and Probes
$68.00 – $265.00
Atkins 50335-K
$68.00
The Atkins hand-held thermocouple digital thermometer measures temperature from -100 to 999°F (-73 to 537°C) and stabilizes within 3 seconds of probe placement.
In stock
Related products
Roller Sponge (3 units) w/ Wand
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
Replacement Cross Cut Knife Blades
Replacement Cross Cut Knife Blades Designed for use with the Stanley utility knife that is included in the KTA Cross
Rilem Tube
Vertical Rilem Tubes are used to measure the rate at which water moves through porous materials like masonry.
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will
Vaprecision Calcium Chloride Vapor Emission Test Kit
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
Coarse Blade PA2056 2mm spacing – 6 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Air leak 4′ roof chamber
Air Leak Roof Seam Chamber
M1 (Battery Operated) 67.5v
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.
