KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts. All of the KTA SCAT Kits conform to SSPC Guide 15, and contain all of the equipment required to perform testing in the field. The KTA Bresle-SCAT Kit I contains a water demineralizer cartridge, 50 Bresle Patches (latex cells), two – 5cc syringes w/ needles, two plastic beakers, a bottle of Quantab chloride indicator strips, a bottle of EM Quant ferrous ion test strips, pH paper and easy to follow instructions. All equipment is contained in a handy plastic carrying case.
KTA-Bresle SCAT Kit I
$615.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
In stock
Related products
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will
Cross Cut Knife
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Surface Coatings for protection against wear
This book covers coating characterization and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings and discusses the various methods used to deposit wear resistance coatings.
Vaprecision Calcium Chloride Vapor Emission Test Kit
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
Medium Blade PA2054 1.5mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
K-2
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Volume I, “Good Painting Practice”
SSPC Painting Manual Volume I, "Good Painting Practice" provides a detailed overview of the procedures, equipment and materials used for surface preparation and coating work on industrial steel and concrete structures.
