- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges

PosiTector RTR 3D Replica Tape Reader
$1,995.00 – $2,715.00Price range: $1,995.00 through $2,715.00

PosiTector RTR 3D Replica Tape Reader Bundle
$50.00 – $1,995.00Price range: $50.00 through $1,995.00
PosiTector SPGTS Probe
$665.00
In stock (can be backordered)
SKU:
212988-1-1
Categories: DeFelsko Products, Uncategorized
Description
Positector SPGTS
The SPGTS is designed to make measuring the surface profile of concrete a quick and easy task. It can read up to 250 mils (6 mm) of profile. This allows you to check the profile of concrete quickly and easily. Like all the other SPG probes the SPGTS uses a field replaceable tungsten carbide tip allows for field replacements to be made. Other features that come along with using a Positector for concrete surface profile readings are:
- The ability to store readings while taking them
- Access to the Defelsko PosiSoft Software for turning your readings into reports.
- A HiLow alarm to immediately know if measurements are out of specification
- Continuous average, standard deviation, min/max thickness, and number of surface profile readings
The SPGTS simply slides on to any colored screen standard body or advanced body with a serial number above 730,000.
Additional information
Weight | 1 lbs |
---|---|
Brand |
Defelsko |
Related products
Corporate Worker Safety and Health Program for Construction Painting Projects
$3,000.00
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
K-2
$12.00
KTA 2mm Cross Cut Guide
$150.00
X-Coarse 1.5 to 4.5 mils (38 to 115 microns)
$42.00
Coarse Blade PA2056 2mm spacing – 6 teeth (Blade Only)
$117.75
Training Surface
$25.00