- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges

Testex Analog Spring Micrometer
$240.00 – $335.00Price range: $240.00 through $335.00

Pipe Pit Gauge
$60.00
Training Surface
$25.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.
Available on backorder
SKU:
162675
Category: Uncategorized
Description
Testex Training Surface
The Testex training surface is perfect for people who aren’t familiar with using replica tape. Â This 1.5 inch disk of phenolic material gives you a known roughness that you can carries a known roughness for you to practice using Replica Tape with. Â Simply stick the tape where the arrow points and use the included burnishing tool to compress the tape. Â Then use a micrometer (sold separately) to verify whether you are using to much or to little pressure. This disk allows you to keep testing until you feel confident that you can achieve accurate results in the field!
Additional information
Weight | 0.0500 lbs |
---|
Related products
K-2
$12.00
KTA 2mm Cross Cut Guide
$150.00
Using Coatings Inspection Instruments 3rd Edition
$75.00
Completely updated, the 3rd edition includes instructions on the step-by-step use of 50 instruments and test kits for measuring ambient conditions (including electronic psychrometers), surface profile (including two digital depth micrometers and a new procedure for use of replica tape), SSPC visual guides, wet and dry film thickness, concrete testing, destructive coating thickness measurement, adhesion, holiday/pinhole detection and coating hardness. An updated list of surface cleanliness standards, an updated index of industry standards, and a new surface salt extraction and analysis procedure are also included.
X-Coarse 1.5 to 4.5 mils (38 to 115 microns)
$42.00
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
$115.75
Medium Blade PA2054 1.5mm spacing – 11 teeth (Blade Only)
$115.75
Coarse Blade PA2056 2mm spacing – 6 teeth (Blade Only)
$117.75