Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 mils (20 to 64 microns)
$36.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.
In stock
SKU: 162500
Category: Uncategorized
Related products
Surface Coatings for protection against wear
$270.00
This book covers coating characterization and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings and discusses the various methods used to deposit wear resistance coatings.
Volume I, “Good Painting Practice”
$195.00
SSPC Painting Manual Volume I, "Good Painting Practice" provides a detailed overview of the procedures, equipment and materials used for surface preparation and coating work on industrial steel and concrete structures.
KTA Cross-cut Guide CCG-2MM KIT
$250.00
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
All goods are in stock!!
C-2
$8.45
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
Rilem Tube
$28.50
Vertical Rilem Tubes are used to measure the rate at which water moves through porous materials like masonry.
KTA 2mm Cross Cut Guide
$150.00
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
Vaprecision Calcium Chloride Vapor Emission Test Kit
$39.00
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
Medium Blade PA2054 1.5mm spacing – 11 teeth (Blade Only)
$83.00
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."