UTG Corrosion Probe for measuring wall thickness of steel substrates. Capable of measuring the wall thickness of uncounted ferrous metals .04 to 5 inches thick. Simply apply couplant to the surface and press the probe to the couplant to take readings. A Positector body is needed to use this probe.
UTG Corrosion Probe
$715.00
UTG Corrosion Probe 2-300 mils wood,concrete,composite material and more
In stock
Additional information
| Weight | 0.7500 lbs |
|---|---|
| Brand | Defelsko |
Related products
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
KTA 2mm Cross Cut Guide
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
C-2
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
K-2
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
M1 (Battery Operated) 67.5v
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.
DE Stearns 14/20 High Voltage Holiday/Pinhole Detector
Verify a pinhole-free coating using the DE Stearns high voltage holiday detector.
Roller Sponge (3 units) w/ Wand
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
Cross Cut Knife
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
