KTA Aluminum Wet Film Thickness Gauge (25 Pack)
$45.00
These credit card-sized (2.25″ x 3.25″) inexpensive, lightweight aluminum notch-type gauges contain a silk screened KTA logo and contact information, and are used measure the thickness of the wet paint film immediately after application.
Aluminum Wet Film Thickness Gauges from KTA
These credit card-sized (2.25″ x 3.25″) inexpensive, lightweight aluminum notch-type gauges contain a silk screened KTA logo and contact information, and are used measure the thickness of the wet paint film immediately after application. The gauge is placed squarely on freshly coated surface, withdrawn, and the wet coating thickness is read directly from the wetted steps (the highest wetted step indicates the wet film thickness). Measurements can be made in mils on one side of the gauge (1-80 mils) or in micrometers (microns) on the opposite side of the gauge (25-2032 microns). Conforms to ASTM D713 and D4414. Made in the USA.
| Weight | 0.0220 lbs |
|---|---|
| Test Method | ASTM D4414, ASTM D713 |
| Brand | KTA Tator |
You may also like…
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
