Positector IRT Probe
$195.00
The Positector IRT probe offers an affordable way to add infrared capability to a Positector 6000 body.
In stock (can be backordered)
Positector IRT Probe
The Positector IRT probe offers an affordable way to add the infrared capability to a Positector 6000 body. Simply slide the probe onto a standard* or advanced body* and the gauge will now be able to take contactless surface temperature readings between -94°F (-70°C) and 716°F (380°C).
The IRT Probe features a 5.7:1 distance to spot ratio. This allows users to be get precise spot readings when close and large area readings when far away. Built into the IRT probe are 7 different emissivity options as well as 2 custom emissivity configuration modes. The first mode allows the emissivity to be set manually and the second allows the temperature to be adjusted based on a temperature reading from a contact thermometer. This allows readings taken with the IRT probe to remain accurate on most surfaces it encounters.
The IRT is also able to interact with the Positector 6000 memory and statistics capability. This allows it to store up to 250 readings on an advanced body or 100,000 on an advanced body. These readings can then be easily turned into a report using the free PosiSoft reporting software or exported into a .csv file to be used in any program. Included with every IRT probe is a certificate of calibration traceable to NIST at no additional charge.
If looking for a gauge that can take infrared surface temperature readings along with other ambient conditions be sure to check out the DPMIR probe found here!
* PosiTector IRT probes are compatible with PosiTector Advanced (serial numbers 730,000+) and PosiTector Standard gage bodies with a color display. A simple gage update may be required.
**Positector 6000 Body Sold Separately
| Weight | 0.4 lbs |
|---|---|
| Dimensions | 8 × 5 × 2 in |
| Brand | Defelsko |
You may also like…
DPMA Probe for Wind and Environmental Readings
PosiTector DPMIR Probe
Related products
PosiTector SPG Surface Profile Gauge
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
DeFelsko Plastic Shims
These convenient, pre-packaged, color-coded plastic shim sets are used to verify the accuracy of electronic dry film thickness gauges.
