- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Barcol Impressor Hardness Tester
$1,416.00
Measure the hardness of aluminum, aluminum alloys, copper, brass, fiberglass, plastics and other materials in the laboratory, shop or field according to ASTM D2583 using the Barcol Impressor Hardness Tester.
SKU:
Barcol Tester Group
Category: Hardness Testing
Description
Barcol Impressor Hardness Tester
Measure the hardness of aluminum, aluminum alloys, copper, brass, fiberglass, plastics and other materials in the laboratory, shop or field according to ASTM D2583 using the Barcol Impressor Hardness Tester. One hand operation in any position and an easy-to-read hardness indicator dial make this tester very field friendly. The portable, lightweight (16 ounces) precision, hand-held impressor can even be used in confined spaces, since there are no batteries and no sparking hazard. Model 935 is for softer plastics and very soft metals and Model 934 is for soft metals and fiberglass. Impressors are sold complete with carrying case, adjusting wrench and two spare indentors.
Additional information
Weight | 1 lbs |
---|---|
Test Method |
ASTM D2583 |
Readout Type |
Analog |
You may also like…
PTC Durometers
$750.00 – $999.95
Measure the indention/penetration hardness of plastics, rubber and thick film coatings in the laboratory, shop or field according to ASTM D2240 using the PTC Durometer Hardness Tester.
Select optionsEarn up to 50 points.
This product has multiple variants. The options may be chosen on the product page
Related products
PosiTector SHD Shore Hardness Durometer
$565.00 – $1,330.00
The PosiTector SHD Shore Hardnesss Durometer is a handheld electronic instrument that measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges - Shore A and Shore D.
Select optionsEarn up to 67 points.
This product has multiple variants. The options may be chosen on the product page
PosiTector BHI
$920.00 – $1,695.00
Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials like harder plastics and fiber-reinforced plastic
Select optionsEarn up to 85 points.
This product has multiple variants. The options may be chosen on the product page
PosiTector SHD Probe
$565.00
Wolf Wilburn Pencil Hardness Tester
$507.00