- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges


Dakota ZX-3
$1,525.00
The Dakota ZX-3 is the replacement for the popular MX-3. Supplied by default is a 5 mHz transducer which allows it to read around 6” of wall thickness.
Out of stock
SKU:
215020
Categories: Bargain Basement, Best Sellers, Wall Thickness Gauges
Description
The Dakota ZX-3 is the replacement for the popular MX-3. The ZX-3 features an extruded aluminum body with gasket sealed nickel-plated aluminum end caps. Weighing only 11 ounces with batteries installed this gauge is designed to last. The sturdy design continues into keypad which has 9 keys behind a sealed membrane which is resistant to water and petroleum products.
Supplied by default is a 5 mHz transducer which allows the ZX-3 to read around 6” of wall thickness over non-coated materials out of the box. Other transducers are available and interchangeable through the two quick disconnect LEMO connectors on the top of the gauge. The Dakota ZX-3 is powered by two AA batteries and can operate for 45 hours on alkaline cells.
Built in is a manual and auto zero mode to ensure that the gauge is reading properly. The ZX-3 also features a high-speed scan at 100 Hz which will display the lowest reading found in the scan.
Included with purchase is:
- Dakota ZX-3 Ultrasonic Gauge
- 5 MHz SIDP .250” Transducer (T-102-2000)
- 4 oz Bottle of Couplant
- Operation Manual
- NIST Traceable Calibration Certificate
Please note that step blocks are not included with purchase and can be purchased separately here: https://ktagage.com/product/certified-step-blocks/.
For more information on wall thickness readings are and why they are important check out this video on KTA University: https://ktauniversity.com/kta-video-learning-series-wall-thickness/.
Additional information
Weight | 2 lbs |
---|---|
Brand |
Dakota |
You may also like…
Certified Step Blocks
$435.00
Dakota V-Block Housing
$150.00
Ultrasonic Couplant
$23.50
Related products
PosiTector Ultrasonic Wall Thickness Gauge
$805.00 – $2,365.00
Measure the wall thickness of pipe and other steel structures from one side using the DeFelsko UTG ultrasonic wall thickness gauge.
Select optionsEarn up to 118 points.
This product has multiple variants. The options may be chosen on the product page
PTC Surface Temperature Thermometer
$65.00 – $163.00
KTA's PTC surface temperature thermometer is small (2" diameter) and lightweight (2 ounces) and measures the temperature of the surface via bimetallic base.
Select optionsEarn up to 8 points.
This product has multiple variants. The options may be chosen on the product page
Testex Press-O-Film Replica Tape – Legacy Roll
$42.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Atkins 35200-K and Probes
$65.00 – $490.40
Cath-Tech CorrReader Test Point Recorder
DeFelsko Certified Coating Thickness Standards
$385.00
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
Select optionsEarn up to 19 points.
This product has multiple variants. The options may be chosen on the product page
FLIR T420bx Thermal Imaging Camera
KTA Abrasive Blasting Conductivity Kit
$249.00