- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Microgroover MG402
$198.00
Microgroover MG 402
Available on backorder
SKU:
210580
Category: Uncategorized
Description
Micro-Metrics Microgroover MG402
The Microgroover MG402 allows you to use your Tooke gauge on substrates that the cutting tips normally aren’t operable on. This cordless tool can be used to cut on numerous materials such as concrete and rubber. Â When not being used it is also capable of cutting, grinding, sawing, and polishing on small-scale uses.
The microgroover is used in aid with a positioning block that allows you control over the cutting angle that is being applied.  If the block is resting on its narrow face then you can achieve a 1x cutting angle and if it is on its wide face a 2x angle can be achieved.  A 4x cut can be achieved without the use of the block.
Included with your purchase is:
- Microgroover Rotary Tool
- Plastic Carrying Case
- 2 Rechargeable Batteries
- Battery Charger
- Technical Data Sheet
- MG402-02 Grinding Tip
- Positioning Block
Additional information
Weight | 1.6000 lbs |
---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Coarse 0.8 to 2.5 mils (20 to 64 microns)
$42.00
K-2
$12.00
Surface Coatings for protection against wear
$270.00
Using Coatings Inspection Instruments 3rd Edition
$75.00
Completely updated, the 3rd edition includes instructions on the step-by-step use of 50 instruments and test kits for measuring ambient conditions (including electronic psychrometers), surface profile (including two digital depth micrometers and a new procedure for use of replica tape), SSPC visual guides, wet and dry film thickness, concrete testing, destructive coating thickness measurement, adhesion, holiday/pinhole detection and coating hardness. An updated list of surface cleanliness standards, an updated index of industry standards, and a new surface salt extraction and analysis procedure are also included.
Vaprecision Calcium Chloride Vapor Emission Test Kit
$39.00
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
$115.75
Reviews
There are no reviews yet.