Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable. The program contains policies and guidance relative to each of the following general areas: General Safety and Health Provisions; Personal Protective Equipment (including respiratory protection); Fire Protection/Prevention; Use of Flammable/Combustible Materials; Scaffolding and Ladders; Confined Space; Cranes and Suspended Work Platforms; Occupational Health and Environmental Controls; Electrical; and Painting/Paint Removal Equipment. Various safety and health forms and checklists are incorporated into the Appendices of the program to ease implementation at individual project sites. This plan meets the safety and health program requirements of the SSPC QP-1 Painting Contractor Certification Program.
Corporate Worker Safety and Health Program for Construction Painting Projects
$3,000.00
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
In stock
Additional information
| Weight | 0.0000 lbs |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Rilem Tube
Vertical Rilem Tubes are used to measure the rate at which water moves through porous materials like masonry.
E2TM (includes magnetic pick-up)
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
M1 (Battery Operated) 67.5v
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.
KTA Cross-cut Guide CCG-2MM KIT
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
All goods are in stock!!
Replacement Cross Cut Knife Blades
Replacement Cross Cut Knife Blades Designed for use with the Stanley utility knife that is included in the KTA Cross
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will
Replacement Flat Sponge
Replacement flat sponge for the Spy 670.
Vaprecision Calcium Chloride Vapor Emission Test Kit
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
Reviews
There are no reviews yet.