- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Pipe Pit Gauge
$60.00
The Pipe Pit Gauge fits neatly into the leather case and can be easily carried in one’s pocket. It will serve as a constant guide for judging the condition of the pipe. Useful formulas, tables, and data giving O.D., wall thickness, and weight per foot for various pipes are etched on the gauge. It should be in the hands of every field superintendent, engineer, or foreman working with pipe.
In stock (can be backordered)
Description
Pipe Pit Gauge
The Pipe Pit Gauge fits neatly into the leather case and can be easily carried in one’s pocket. It will serve as a constant guide for judging the condition of the pipe. Useful formulas, tables, and data giving O.D., wall thickness, and weight per foot for various pipes are etched on the gauge. It should be in the hands of every field superintendent, engineer, or foreman working with pipe.
The pit gauge is made of 0.50″ highly polished stainless steel – is about 2-11/16″ wide and 5-1/4″ long, which is vest-pocket size. The indicator arm has a stylus that fits into the pits of pipe being measured. A guide is fastened to the gauge to protect and guide the indicator arm. The scale on the right of the guide is shown as an arc and is expressed in sixteenths of an inch and in mils (thousandths of an inch). The gauge weighs 8 ounces.
Additional information
| Weight | 0.2500 lbs |
|---|
Related products
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
