- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Blotter Paper
$35.00
This package of 45 pre-cut 6″ x 6″ pieces of blotter paper is used to verify compressed air cleanliness.
In stock (can be backordered)
Description
Blotter Paper Pack
This package of 45 pre-cut 6″ x 6″ pieces of blotter paper is used to verify compressed air cleanliness. The SSPC/NACE joint standards for abrasive blast cleaning invoke a requirement to verify the cleanliness of compressed air prior to abrasive blast cleaning or other operations where contaminated compressed air can adversely impact coating performance. Simply attach a piece to a rigid backing using tape and perform the test according to ASTM D 4285. The blotter paper can be marked with the date and time of test and retained for documentation as necessary. Made in the USA.
Additional information
| Weight | 2.0000 lbs |
|---|---|
| Brand |
KTA Tator |
You may also like…
Related products
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
