Cath-Tech CTL-3000 Analogue DCVG
$3,200.00
- Description
- Additional information
- Reviews (0)
Description
Cath-Tech CTL-3000 Analogue DCVG
The Cath-Tech CTL-3000 Analogue DCVG is used to detect holidays in coatings on buried structures to accurately locate coating defects.
Features
•Accurately locate coating defects
•Estimate defect size
•Indentify priority for excavation
•Monitor coating condition
•Confirm electrical continuity
•Single surveyor required
•Auto-zero function to remove bias from readings
•Comprehensive 1 year warranty
Technical Specification
•Meter: Centre zero analogue
•Input Impedance: 10, 100, 1000 Mohm
•Measurement: Scales to 10, 20, 50, 100, 200, 500, 1000, 2000, 5000 mV
•Case: Die cast aluminum, grey baked enamel
•Dimensions: 19cm x 10cm x 13cm (7.5” x 4” x 5”)
•Weight: 1.4 kg (3 lb)
•Battery: 12V 2.0 amp hour NiMH
•Half cell poles: Fiberglass, adjustable length
•Half cells: Cu/CuSO4
•Carrying Case: Plastic, IP67 rated 40.5cm x 33cm x 18cm (16” x 7” x 13”)
Included
•CTL-3000
•2 half cell poles with cables
•2 Cu/CuSO4 half cells
•AC charger; 120/240 V AC, 50/60 Hz input
•Carrying case
•Neck strap
•Owners manual
Additional information
| Weight | 10.0000 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Add to cartQuick ViewCath-Tech CI-50 Current Interrupter w/ GPS
* Portable current interrupter * GPS continuously synchronized · Microprocessor driven · Flash memory · 5 programmable time schedules ⇒ Interruption cycle ⇒ Start and stop times ⇒ Start and stop dates · Holds power ON when not interrupting · Colour coded SuperCon® output terminals · Storage compartment for cables and accessories · Comprehensive 1 year warranty Technical Specification · Capacity DC: Up to 50A at 100VDC · Switching: Electronic relay · Case: IP67 / NEMA 4X plastic case with o-ring seal and locking hasp · Dimensions: 27cm x 25cm x 20cm (11” x 10” x 8”) · Weight: 5 kg (11 lb) · Battery: 7.2V 2 amp hour NiMH · User Interface: 20x4 LCD display, sunlight readable, and 16 key pad · Com Port: RS-232 communication port, 9 pin male · External Power: Accepts 12V DC external power to supplement battery life · GPS synchronized, with magnet mount antenna for easy placement with view of the sky ⇒ Cycle time 1/4 sec to 6 min ⇒ Off time: 0 to 9999mSec (synchronized to the beginning of the minute, 0 seconds) · Non GPS synchronized operation also possible Included · CI-50 Current Interrupter · AC charger; 120/240V AC, 50/60 Hz input · DC interruption cables with copper alligator clips and rubber boots · Magnet mount GPS antenna$2,195.00Add to cartQuick View -
Add to cartQuick ViewCath-Tech CorrReader Test Point Recorder
Record critical CP data such as pipe-soil potentials, AC, date, time and GPS location for many points such as; Test stations, Meters, Risers, Valves, Bonds, Tanks, etc. Technical Specification · Single channel, DC and AC: ⇒ DC range of +/-10V at 0.1 mV precision with ≤1% accuracy ⇒ AC range of 100V at 1 mV precision with ≤1% accuracy · Input impedance ≥ 10 MΩ · AC rejection at 50 Hz to 60 Hz ≥ 80db, 50 V RMS superimposed · Heavy duty impact resistant IP65 NEMA 4 case · Operator programmable interruption cycle and ON/OFF durations. · 16x4 LCD sunlight readable high contrast display · Membrane switch tactile keypad with 6 buttons · Long life 3.6V Li Ion battery recharged via USB · Fully integrated internal GPS · Micro SD card memory & data storage · Waterproof USB 2.0 interface for data transfer · Dimensions: 12.5cm x 5cm x 19cm, 5” x 2” x 7.5” · Weight: 525 g, 1.2 lbs Features · Designed for simple easy use, even by non-corrosion technicians · Internal GPS for synchronization and location information · Optional entry of operator comments, location ID, etc · Data saved to SD card with GPS coordinates and date/time stamped, no more hand written notes · Programmable GPS time offset to operate in local time · Data stored in an ASCII comma delimited file, no special software required! · Ergonomic hand held design with no-slip grips · Waterproof 5 way binding posts for test leads · Comprehensive 2 year warranty$1,395.00Add to cartQuick View -
Add to cartQuick ViewCath-Tech CI-100 Current Interrupter w/ GPS
Features •Portable current interrupter •GPS continuously synchronized •Microprocessor driven •Flash memory •5 programmable time schedules Interruption cycle Start and stop times Start and stop dates •Holds power ON when not interrupting •Colour coded SupreCon® output terminals •Storage compartment for cables and accessories •Comprehensive 1 year warranty Technical Specification • Capacity DC: Up to 100A, up to 250VDC • Capacity AC: Up to 100A, up to 600VAC • Switching: Mechanical relay • Case: IP67 / NEMA 4X plastic case with o-ring seal and locking hasp • Dimensions: 40.5cm x 33cm x 18cm (16” x 13” x 7”) • Weight: 9.5 kg (21 lb) • Battery: 12V 5.5 amp hour sealed lead acid • User Interface: 20x4 LCD display, sunlight readable, and 16 key pad • Com Port: RS-232 communication port, 9 pin male • External Power: Accepts 12V DC external power to supplement battery life • GPS synchronized, with magnet mount antenna for easy placement with view of the sky Cycle time 1/4 sec to 6 min Off time: 0 to 9999mSec (synchronized to the beginning of the minute, 0 seconds) • Non GPS synchronized operation also possible Included • CI-100 Current Interrupter • AC charger; 120/240V AC, 50/60 Hz input • DC interruption cables with copper alligator clips and rubber boots • Magnet mount GPS antenna • Owners manual Specifications subject to change without notice, see owners manual for further information$2,520.00Add to cartQuick View
Reviews
There are no reviews yet.