A refill of 5 tests for use with the Chlor*Test CSN kit.
CSN Refill (5 Pack)
$200.00
KTA Surface Contamination Analysis Test (SCAT) Kits are used to extract surface samples and analyze the samples for chlorides and other soluble salts.
In stock
Related products
Air Leak Chamber, Wall to Base
12" Wall to Base Test Chamber
Roller Sponge (3 units) w/ Wand
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
Vaprecision Calcium Chloride Vapor Emission Test Kit
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
M1 (Battery Operated) 67.5v
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.
Cross Hatch Tape
M.E. Taylor Cross Hatch Tape Designed with ASTM D3359-09e2 in mind the M.E. Taylor cross hatch  tape is perfect for
Rilem Putty
The Rilem Putty is used to attach the Rilem Tube to vertical surfaces.
Fine Blade PA2052 1mm spacing – 6 teeth (Blade Only)
PA2000 1mm 6 Teeth Cutting Blade Designed for use with the PA2000 Adhesion Test Kit blade handle this blade will
Cross Cut Knife
The KTA Cross Cut Guide Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
