- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
KTA Aluminum Wet Film Thickness Gauge (25 Pack)
$45.00
These credit card-sized (2.25″ x 3.25″) inexpensive, lightweight aluminum notch-type gauges contain a silk screened KTA logo and contact information, and are used measure the thickness of the wet paint film immediately after application.
Description
Aluminum Wet Film Thickness Gauges from KTA
These credit card-sized (2.25″ x 3.25″) inexpensive, lightweight aluminum notch-type gauges contain a silk screened KTA logo and contact information, and are used measure the thickness of the wet paint film immediately after application. The gauge is placed squarely on freshly coated surface, withdrawn, and the wet coating thickness is read directly from the wetted steps (the highest wetted step indicates the wet film thickness). Measurements can be made in mils on one side of the gauge (1-80 mils) or in micrometers (microns) on the opposite side of the gauge (25-2032 microns). Conforms to ASTM D713 and D4414. Made in the USA.
Additional information
| Weight | 0.0220 lbs |
|---|---|
| Test Method |
ASTM D4414 ,ASTM D713 |
| Brand |
KTA Tator |
You may also like…
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
Related products
PosiTector 200 Ultrasonic Coating Thickness Gauge
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more.
B-Probe for coatings over wood, composites. 0-40 mils.
C-Probe for coatings over concrete, fiberglass. 2-150 mils.
D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.
