Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector. Spy is a leader in holiday detection equipment. The ergonomically designed, one-piece portable nondestructive low voltage (67.5v) detector uses regular potable water from a wetted sponge and a ground wire (attached to the uncoated substrate) to complete a circuit and produce an audible signal indicating a pinhole or flaw in the coating. The tester is suitable for use on any nonconductive coating (up to 20 mils thick) applied to a conductive substrate. While there is no spark hazard during detection, the device operates on 9v batteries and is not intrinsically safe. The detector is sold complete with batteries, ground cable, 24″ handle and sponge. Your choice of a flat sponge or a unique roller sponge for easier inspection (choose a configuration when ordering). The detector conforms to ASTM D5162. Made in the USA.
Spy 670 Low Voltage Pinhole Detector
$440.00
Verify a pinhole-free coating using the Spy low voltage wet sponge holiday detector.
In stock
Related products
C-2
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
Vaprecision Calcium Chloride Vapor Emission Test Kit
The Vaprecision Calcium Chloride Moisture Vapor Emission Kit contains all of the supplies to check for residual moisture in concrete slabs.
S-2
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
Volume II, “Systems and Specifications”
SSPC Painting Manual Volume II, "Systems and Specifications" provides an up-to-date collection of SSPC standards, guides and other concensus documents developed and published by SSPC.
E2TM (includes magnetic pick-up)
These high quality, economical inspection mirrors are available in various sizes and are used to inspect difficult access areas.
Fine Blade PA2053 1mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
M1 (Battery Operated) 67.5v
Verify a pinhole-free coating using the Tinker-Rasor low voltage wet sponge holiday detector.
Medium Blade PA2054 1.5mm spacing – 11 teeth (Blade Only)
The Gardco Paint Adhesion Test Kit contains all of the equipment you will need to perform cross-cut adhesion testing according to Method B in ASTM D3359, "Measuring Adhesion By Tape Test."
