PosiTest AT-Manual Kit
$2,245.00
Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit. The PosiTest AT uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface.
Only 3 left in stock (can be backordered)
- Â Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
- Â Pull Rate Indicator to manually monitor and adjust the rate of pull
-  Environmentally sealed enclosure – weatherproof, dustproof and shockproof – meets or exceeds IP65
- Â Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
- Â 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
– 10 mm: 10000 psi (70 MPa)
– 14 mm: 6000 psi (40 MPa)
– 20 mm: 3000 psi (20 MPa)
– 50 mm: 480 psi (3.3 MPa)
– 50×50 mm: 375 psi (2.585 MPa) -  Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell
- Â Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls
- Â Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data
- Â Software Updates via web keep your instrument current
| Weight | 12.1500 lbs |
|---|
Related products
Corporate Worker Safety and Health Program for Construction Painting Projects
Developed under the direction of a Certified Industrial Hygienist, the KTA Corporate Worker Safety and Health Program for Industrial Painting Projects is designed to provide guidance on the safety and health hazards typically encountered on industrial maintenance painting projects. This program is specifically designed for use on projects where the OSHA Construction Industry standards (29 CFR 1926) are applicable.
Using Coatings Inspection Instruments 3rd Edition
Completely updated, the 3rd edition includes instructions on the step-by-step use of 50 instruments and test kits for measuring ambient conditions (including electronic psychrometers), surface profile (including two digital depth micrometers and a new procedure for use of replica tape), SSPC visual guides, wet and dry film thickness, concrete testing, destructive coating thickness measurement, adhesion, holiday/pinhole detection and coating hardness. An updated list of surface cleanliness standards, an updated index of industry standards, and a new surface salt extraction and analysis procedure are also included.
