- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
PosiTest DFT Coating Thickness Gage
$495.00 – $695.00
PosiTest Coating Thickness Gauge
$350.00
This compact, lightweight, precisely balanced coating thickness gauge nondestructively measures the thickness of nonmagnetic coatings applied to ferrous substrates.
Description
PosiTest Coating Thickness Gauge
This compact, lightweight, precisely balanced coating thickness gauge nondestructively measures the thickness of nonmagnetic coatings applied to ferrous substrates. Unique three-point contact design to prevent rocking the gauge during measurement acquisition. Go/no go button can be preset for rapid measurement. Tungsten carbide probe tip for long life and reliability. Rugged housing unaffected by mechanical shock, water, solvents or acids. Complete with leather case and wrist/neck lanyards. Accuracy is +/- 5%. Conforms to ASTM A153, B499, B530, D7091, E376; British Standard BS5411, Danish Standard DIN50981 & 50982; SSPC PA2
Additional information
| Weight | N/A |
|---|---|
| Brand |
Defelsko |
| Measurement Range |
0-8 mils ,0-80 mils |
| Readout Type |
Analog (Type 1) |
| Substrate |
Ferrous Metals |
| Test Method |
ASTM B499 ,ASTM D7091 |
Related products
PosiTector 200 Ultrasonic Coating Thickness Gauge
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more.
B-Probe for coatings over wood, composites. 0-40 mils.
C-Probe for coatings over concrete, fiberglass. 2-150 mils.
D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
