- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges



Hypodermic Needle Pressure Gauge
$29.95 – $169.95
Testex Coarse Replica Tape (6-Pack)
$228.00
Get stocked with this 6-pack of Coarse Press-O-Film® Replica Tape (0.8 to 2.0 mils). Includes 6 cartons, 300 impressions total, and a burnishing tool.
SKU:
162156-6
Categories: DeFelsko Products, Replica Tape Cartons, Surface Profile
Description
Press-O-Film® Replica Tape – Coarse (6-Pack)
Each carton contains 50 pieces (impressions) of Testex Tape
Coarse measures: 0.8 to 2.0 mils (20 to 50 µm)
This 6-pack of Coarse Replica Tape ensures you are well-stocked and prepared for measurements. Replica Tape consists of a compressible foam layer attached to a uniformly thick, incompressible polyester substrate. When the tape is pressed against a rough steel surface, the foam collapses and forms an impression of the surface. To measure the surface profile, use an spring or digital micrometer thickness gauge and subtract the thickness of the substrate.
Includes:
- 6 cartons of replica tape (50 impressions each, 300 impressions total)
- High Accuracy Burnishing Tool
- Quick Guide Instructional Pamphlet
Additional information
Weight | 1 lbs |
---|---|
Brand |
Testex |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Keane-Tator Illumintated Magnifier 372
$52.30
Keane-Tator Surface Profile Comparator
$52.30 – $360.00
Keane-Tator Surface Profile Shot Comparator Disc 372/SH
$115.00
KTA NOG (Nozzle Orifice Gage)
NACE Surface Finish Weld Replica
$95.00
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
Powder Comb Thickness Gauge
$45.00
These small pocket-sized aluminum gauges are uniquely designed to measure the thickness of powder coatings after application but before they are cured.
Select optionsEarn up to 2 points.
This product has multiple variants. The options may be chosen on the product page
Testex X-Coarse Replica Tape (6-Pack)
$228.00
Reviews
There are no reviews yet.