Adhesive Kit for PosiTest AT
$35.00
The ResinLab EP11HT 2-Part Epoxy kit includes extra adhesive, mixing sticks, palettes, and cotton swabs. Ideal for creating dollies with varying yields based on size.
Includes ResinLab EP11HT 2-Part Epoxy, extra adhesive, mixing sticks, palettes, and cotton swabs.
Approximate Epoxy Yield:
- 10 mm: ~400 dollies
- 14 mm: ~200 dollies
- 20 mm: ~100 dollies
- 50 mm: ~16 dollies
Actual yield may vary based on epoxy usage per dolly and waste.
| Weight | 1 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
Reviews
There are no reviews yet.