- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
PosiTest AT Hole Saw 10MM
$15.00
Precision hole saws for adhesion testing, designed to isolate test areas by cutting through coatings or substrates. Available in 14, 20, and 50 mm sizes.
SKU:
14304
Category: DeFelsko Products
Description
Hole Saw for Adhesion Testing
- Precise Test Area Isolation – Ideal for cutting or scoring through coatings or substrates to define a specific diameter test area.
- Recommended Use – A 14 mm, 20 mm, or 50 mm hole saw can be used to cut around the dolly (pull stub) to isolate the test area and remove excess adhesive.
- Strong Lateral Bonding Consideration – For coatings with high lateral adhesion, it is advised to cut completely through the coating down to the substrate.
- Concrete Repair & Overlay Testing (ASTM C1583) – Use a 50 mm diamond-impregnated hole saw to create a perpendicular cut at least 10 mm (0.5 inches) deep.
- Included Accessories – Depending on the model, a hole saw is included with each PosiTest Adhesion Tester or Conversion Kit (except ATA50T and AT50TKIT). A 14 mm hole saw is available for use with 14 mm dollies.
Additional information
Weight | 1 lbs |
---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
PosiTector SPG Surface Profile Gauge
$410.00 – $1,535.00
The PosiTector SPG Surface Profile Gauge measures and records peak to valley surface profile heights.
Select optionsEarn up to 77 points.
This product has multiple variants. The options may be chosen on the product page
DeFelsko PosiTector 6000 and Probes
$124.95 – $1,865.00
PosiTector CMM IS
$145.00 – $1,970.00
Positector CMM IS conformance with ASTM F2170 and is designed to easily collect and report relative humidity in concrete floor slabs. RH readings available on an Apple or Android smart device or a Positector Advanced gauge with a DPM probe.
Select optionsEarn up to 99 points.
This product has multiple variants. The options may be chosen on the product page
PosiTest Coating Thickness Gauge
$350.00
This compact, lightweight, precisely balanced coating thickness gauge nondestructively measures the thickness of nonmagnetic coatings applied to ferrous substrates.
Select optionsEarn up to 18 points.
This product has multiple variants. The options may be chosen on the product page
PosiTest DFT Coating Thickness Gage
$495.00 – $695.00
DeFelsko Certified Coating Thickness Standards
$385.00
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
Select optionsEarn up to 19 points.
This product has multiple variants. The options may be chosen on the product page
Positector 6000 Advanced Memory Body
$790.00
PosiTector SmartLink
$560.00
Reviews
There are no reviews yet.