- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges

KTA POG (Pressure Orifice Gage)
$95.00 Original price was: $95.00.$69.99Current price is: $69.99.

Dakota ZX-3
$1,525.00
Certified Step Blocks
$435.00
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge. These blocks have a certificate traceable to NIST.
In stock (can be backordered)
SKU:
180450
Categories: Best Sellers, Wall Thickness Gauges
Description
The certified step blocks are used to verify the accuracy of an ultrasonic wall thickness gauge. These blocks have a certificate traceable to NIST to go along with them. They are constructed from 1018 steel, so they maintain their accuracy overtime. The steps are 100, 200, 300, 400, and 500 mils with an accuracy of ±1 mil.
If a wall thickness gauge is needed to go along with the step blocks our full selection can be found here: https://ktagage.com/product-category/wall-thickness-gauges/.
Additional information
Weight | .5 lbs |
---|
Related products
Testex Analog Spring Micrometer
$240.00 – $335.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.' If Needing ISO Certification please call our sales team at 1-800-582-4243
Select optionsEarn up to 17 points.
This product has multiple variants. The options may be chosen on the product page
PosiTest DFT Coating Thickness Gage
$495.00 – $695.00
Testex Press-O-Film Replica Tape – Legacy Roll
$42.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Chlor*Test CSN SCAT Kit
$240.00 – $1,680.00
PosiPen
$265.00
PTC Durometers
$750.00 – $999.95
Measure the indention/penetration hardness of plastics, rubber and thick film coatings in the laboratory, shop or field according to ASTM D2240 using the PTC Durometer Hardness Tester.
Select optionsEarn up to 50 points.
This product has multiple variants. The options may be chosen on the product page
Tooke Gauge
$75.00 – $1,380.00
Ultrasonic Couplant
$23.50