- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
KTA Advanced Inspection KIT
$2,150.00
In stock (can be backordered)
Description
KTA Advanced Coating Inspection KIT
The KTA Advanced inspection kit contains everything you should need for an inspection. The Positector 6000 Advanced body featured in this kit allows you to keep on top of your readings. It gives you the capability to store 100,000 readings in up to 1,000 batches among the many other features.
Included in the Advanced Inspection Kit is:
- Advanced Positector Body
- F probe (ferrous, 0-60mils)
- DPM probe (ambient conditions)
- Certified Testex Spring Micrometer w/ 1 roll XC Tape
- Certified Taylor 6215 Paint Thermometer (0-220F)
- KTA Certified Wet Film Gauge (0-60 mils)
- Blotter Paper
- C-2 Inspection Mirror
- Intrinsically Safe Flashlight
- Durable Hard Case
Additional information
| Weight | 16 lbs |
|---|
You may also like…
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
