- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Testex Coarse Replica Tape
$38.00
Stock up on Coarse Press-O-Film® Replica Tape (0.8 to 2.0 mils). Includes 1 carton of 50 impressions.
Description
Press-O-Film® Replica Tape – Coarse
1 carton containing 50 pieces (impressions) of Testex Tape
Coarse measures: 0.8 to 2.0 mils (20 to 50 µm)
Replica Tape consists of a compressible foam layer attached to a uniformly thick, incompressible polyester substrate. When the tape is pressed against a rough steel surface, the foam collapses and forms an impression of the surface. To measure the surface profile, use an spring or digital micrometer thickness gauge and subtract the thickness of the substrate.
Additional information
| Weight | 1 lbs |
|---|---|
| Brand |
Testex |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
You may also like…
Related products
PosiTector 200 Ultrasonic Coating Thickness Gauge
The PosiTector 200 Ultrasonic Coating Thickness Gauge measures the thickness of coatings over concrete, wood, composite materials, and more.
B-Probe for coatings over wood, composites. 0-40 mils.
C-Probe for coatings over concrete, fiberglass. 2-150 mils.
D-Probe for Thick soft coatings, polyureas, thick polymers. 2-300 mils.
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
Reviews
There are no reviews yet.