- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Testex Digital Micrometer Thickness Gage Kit
$440.00
The Testex Digital Micrometer Thickness Gage Kit provides everything you need to measure surface profiles with replica tape.
Description
Testex Digital Micrometer Thickness Gage Kit
The Testex Digital Micrometer Thickness Gage Kit provides everything you need to measure surface profiles with replica tape. The kit includes:
- Digital micrometer
- Three cartons of replica tape: Coarse, X-Coarse, and X-Coarse Plus
- Two burnishing tools: High Accuracy Burnishing Tool and classic burnishing tool
- Instruction manual
- USB cable
- Certificate of Calibration
- One AAA battery
- Custom case
This comprehensive set ensures accurate and reliable surface profile measurements.
——————
Testex Digital Micrometer Thickness Gage
The Testex Digital Micrometer is designed to make using Testex Replica Tape easier. The bright color display allows for easy viewing and quick readings.
User Friendly
- The bright digital color display shows large numbers for easy readings.
- Measures in both Microns and Mils
- Stores up to 250 readings and shows on-screen statistics. You can view and download these measurements onto any computer using the included USB cable. No software required.
- The housing is made of durable metal
- Powered by 1 AAA battery
Made for Replica Tape
- Just select the correct replica tape grade, and the appropriate conversion factor will be applied automatically. Then, subtract the 50 µm (2 mils) backing thickness
- In ‘Average mode,’ the Micrometer guides the user to take two readings and then calculates their average, adhering to international standards.
- Each digital micrometer includes a traceable Certificate of Calibration
Download to your PC or Mac
- Fully compatible with the powerful PosiSoft Software for archiving and reporting measurement data
- USB Drive mode retrieves data like a flash drive in .csv format. No software installation or internet connection is needed.
| Measuring Range | 0 – 40 mils | 0 – 1000 μm |
|---|---|---|
| Accuracy | 0 – 10 mils: ±0.2 mils
10 – 40 mils: ±(0.2 mils + 1%) |
0 – 250 μm: ±5 μm 250 – 1000 μm: ±(5 μm + 1%) |
| Resolution | 0.1 mils | 1 μm |
| Closing Force | 1.1 N | 1.1 N |
| Anvil Diameter | 0.25″ | 6.35 mm |
Additional information
| Weight | 1 lbs |
|---|---|
| Brand |
Testex |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
Reviews
There are no reviews yet.