- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Testex Analog Spring Micrometer
$240.00 – $335.00
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.’ If Needing ISO Certification please call our sales team at 1-800-582-4243
Description
Testex Spring Micrometers are designed for use in conjunction with the Testex Replica Tape. This gauge falls into conformance of Method C in ASTM D4417 for acquiring surface profile measurements. The micrometer allows you to get quick and accurate readings while allowing you to keep a permanent copy of the surface profile in the form of the replica tape.
Usage of these gauges is very straight forward. If you would like an instructional video with step by step instructions on usage please see this video on our KTA University website https://ktauniversity.com/kta-video-learning-series-measure-surface-profile-depth-testex-press-o-film-replica-tapespring-micrometer/.
A factory certification is not done on any of the micrometers. Â If you would like your unit certified be sure to add it to the micrometer before adding it to your cart.
Additional information
| Weight | 0.7500 lbs |
|---|---|
| Brand |
Testex |
| Certification: |
None ,NIST w/Data |
You may also like…
Related products
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
Pipe Pit Gauge
The Pipe Pit Gauge fits neatly into the leather case and can be easily carried in one's pocket. It will serve as a constant guide for judging the condition of the pipe. Useful formulas, tables, and data giving O.D., wall thickness, and weight per foot for various pipes are etched on the gauge. It should be in the hands of every field superintendent, engineer, or foreman working with pipe.
