- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Tinker & Rasor APW
$4,200.00
Detect pinholes in coating and linings greater than 20 mils thick. Variable voltage up to 35,000 volts. Select from various electrodes. Comes with a wand, ground wire, and battery charger.
In stock (can be backordered)
Description
Tinker & Rasor APW High Voltage Holiday Detector
The Tinker & Rasor APW high voltage holiday detector will allow you to inspect nearly any coating you come across for holidays and pinholes. With the majority of the instrument capable of being worn on a belt, it helps reduce arm fatigue when being used on floors, tanks, walls, and other non-pipe structures. The APW also features highly visible LED lights and an audible alarm to alert you of any pinholes that you encounter. It features a mil-spec ergonomic design to give it the ideal combination of comfort and durability.
The APW now also includes a safety switch right in the handle. If the switch is not held in the holiday detector will not output a charge. This increases the safety of the operator and everybody on the job site!
| Output Voltage Range: | 800 volts to 35,000 volts |
| Output Voltage Positions: | 100 volt increments |
| Accuracy: | +/- 5% |
| Input Voltage: | 6v Battery, 110 volt AC Charger, 220 volt charger available |
| Instrument Dimensions: | 6.75” x 8.5” x 3.5”, 8lbs |
| Carrying Case Dimensions: | 41” x 18” x 8” , 35 lbs |
Included with every APW purchase is:
- Instrument and Power Pak
- 5′ High Voltage Power Cable
- 20′ Ground Cable
- Wand and Extension Handles
- Rechargeable Battery and Charger
- Your Choice of Electrode*
- Belt (Hip or Shoulder)
- Mil-Spec Carrying Case with Wheels
- Adapter to use “Spy” Spring Electrodes with Tinker and Rasor Wand Handle
- Voltage Adjusting Screw Driver
- Instruction Manual
*Choice of Electrodes
Please put which one of the following electrodes you would like with your detector in the notes when placing your order.
Full Circle Spring Electrode for any one pipe diameter between 2″ and 36″
Half Circle Spring Electrode for any one pipe diameter between 0.75″ and 8″
Silicone-Rubber, or Wire-Brush Electrode with any one width between 2″ and 8″
Additional information
| Weight | 38.0000 lbs |
|---|---|
| Brand |
Tinker & Rasor |
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
