- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Blotter Paper
$35.00
This package of 45 pre-cut 6″ x 6″ pieces of blotter paper is used to verify compressed air cleanliness.
In stock (can be backordered)
Description
Blotter Paper Pack
This package of 45 pre-cut 6″ x 6″ pieces of blotter paper is used to verify compressed air cleanliness. The SSPC/NACE joint standards for abrasive blast cleaning invoke a requirement to verify the cleanliness of compressed air prior to abrasive blast cleaning or other operations where contaminated compressed air can adversely impact coating performance. Simply attach a piece to a rigid backing using tape and perform the test according to ASTM D 4285. The blotter paper can be marked with the date and time of test and retained for documentation as necessary. Made in the USA.
Additional information
| Weight | 2.0000 lbs |
|---|---|
| Brand |
KTA Tator |
You may also like…
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
