- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Back to products
Testex Analog Spring Micrometer
$240.00 – $335.00
Testex X-Coarse Plus 4.6 to 5 mils (116 to 127 microns)
$42.00
Testex X-Coarse Plus 4.6 to 5 Mil replica tape is used with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417.
In stock (can be backordered)
Description
Testex X-Coarse Plus 4.6 to 5 Mil Replica Tape
X-Coarse Plus Replica tape is designed to be used in the 4.5 to 5 mil range. Â This tape is designed to be used in conjunction with an analog or digital micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Additional information
| Weight | 0.0500 lbs |
|---|
You may also like…
Related products
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. Made in the USA.
