Powder Comb Thickness Gauge
$45.00
These small pocket-sized aluminum gauges are uniquely designed to measure the thickness of powder coatings after application but before they are cured.
Powder Comb Thickness Gauge
These small pocket-sized aluminum gauges are uniquely designed to measure the thickness of powder coatings after application but before they are cured. The gauge features sharp teeth that won’t cause plowing or spillover of the powder during measurement, and broad standoffs to help keep the gauge perpendicular to the surface during measurement. Each powder comb has been designed to be small enough to fit in a shirt pocket. Each gauge comes in a leather pouch. Six models are available for measuring different thicknesses: three models that measure in mils and three models that measure in micrometers (microns). The ranges are:
Model 1 (mils): 3, 6, 9, 12 mil teeth
Model 2 (mils): 10, 15, 20, 25 mil teeth
Model 3 (mils): 20, 30, 40, 50 mil teeth
Model 4 (microns): 75, 150, 225, 300 micron teeth
Model 5 (microns): 250, 375, 500, 625 micron teeth
Model 6 (microns): 500, 750, 1000, 1250 micron teeth
| Weight | N/A |
|---|---|
| Brand | Defelsko |
| Build Material | Aluminum |
| Model | Model 1, Model 2, Model 3, Model 4, Model 5, Model 6 |
Only logged in customers who have purchased this product may leave a review.
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
DeFelsko Certified Coating Thickness Standards
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gauge accuracy at the test site each time a coating thickness gauge is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution. FERROUS
S1 0, 3, 10, 60 mils
S2 0, 3, 10, 40 mils
Reviews
There are no reviews yet.