- Bargain Basement
- Abrasive Blasting
- Adhesion
- Ambient Conditions
- Cases
- Cathodic Protection
- Coating Test Panels
- Coating Thickness Gauge
- Combination Gauges
- Compliance Programs
- Concrete Testing
- Corrosion Coupon Test Kits
- Dry Film Thickness Gauges
- Field Microscopes
- Gloss & Appearance
- Hardness Testing
- Holiday/Pinhole Detection
- Inspection Instrument Kits
- Miscellaneous
- Moisture Detection
- Powder Coating
- Publications
- Surface Cleanliness
- Surface Contamination Test Kits
- Surface Profile
- Wall Thickness Gauges
- Wet Film Thickness Gauges
Surface Profile Measurement Bundle – Option 1
$333.00
Available on backorder
Description
Measure surface profile according to the requirements of ASTM D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel, Method C (replica tape) using this convenient, economical surface profile measurement bundle. The kit includes your choice of a calibrated Testex Standard or Linearizing Spring Micrometer, one roll of Testex Coarse (0.8-2.5 mils) replica tape (50 pcs./roll), one roll of Testex X-Coarse (1.5-4.5 mils) replica tape (50 pcs./roll), and two plastic burnishing tools. Purchased separately these items total $370.00. Save
10% and get two plastic burnishing tools for free when you purchase the bundle.
Additional information
| Weight | 2.5 lbs |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Testex Press-O-Film Replica Tape – Legacy Roll
Testex replica tape is used in conjunction with an analog or digital spring-loaded micrometer for acquiring surface profile measurements according to Method C in ASTM D4417. The replica tape is rubbed onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. The replica is quantified using a spring-loaded micrometer to determine the maximum peak-to-valley depth. Each roll of tape contains 50 pieces.
Coarse 0.8 to 2.5 / 20 to 64
X-Coarse 1.5 to 4.5 / 38 to 115
X-Coarse Plus 4.6 to 5.0 / 116 to 127
If you are looking for the new Testex cartons, click here.
Dial Depth Pit Gauge
This precision gauge measures the depth of pits up to 125 mils (0.5 mil increments). The 2.5" x 3.75" gauge is designed with an elongated knife edge stabilizer and a cut-out for positioning the pinpoint stylus directly over the pit for optimum measurements. Gauge comes complete with case, instructions and manufacturer's Certificate of Accuracy.
Reviews
There are no reviews yet.